A designed solution with added value, Sønderborg, Denmark
A designed solution with added value
In autumn 2014, Uponor Infra in Denmark was contacted by the utility company Sønderborg Forsyning in the southern part of Jutland. They were originally looking for a solution to replace an existing 1,000mm concrete pipeline, but ended up with a designed solution with added value.
“The pipeline went through a privately owned field and of course the owner was not too happy with the overflow. In addition, the field owner did not wish to have a pipeline going through his field. The pipe would thus have to be installed along the field boundary. Therefore, we turned to Uponor for a designed solution.”
A welded designed solution
“In the solution proposal, we concentrated on the customer’s need for a designed and welded solution in order to tackle the challenges posed by the height differences along the field. The height differences and the terrain meant that we had to take a lot of bends into account. Our original solution was based only on SN8 Weholite pipes, but we revised it later on during the project, as we could offer the customer a far better solution yielding greater value,” says Jan Lunding, Project Technical Manager at Uponor Infra.
During the proposal process, Uponor worked together with Grontmij, one of the leading consulting and engineering companies in Europe, in delivering, for instance, the method statement for installation guidance.
Added value, easy and fast installation
During the evaluation of the proposed solution, which took place at the construction site, Jan Lunding discovered that the Weholite pipeline would be connected to a concrete chamber at one end. The chamber had to be replaced. Uponor suggested that the chamber should be made of plastic instead of concrete. Calculations were made and sent to Sønderborg Forsyning. Within a week, the order was placed!
“The chamber was made of Weholite panels. It gave us added value by saving us a lot of time. Since the chamber could be prefabricated and delivered in one piece, it was easy and fast for the constructor to install. Time was an important issue for us, especially as the pipeline and chamber are intended to transport stormwater away from the area,” says Finn Christensen.
A professional and active partner
“Uponor not only provided us with a customised solution, but also offered a range of services and technical support,” says Finn Christensen.
“With Uponor we had a professional and active partner throughout the entire project. Therefore we ended up with a unique solution that matched our specific needs for a welded designed solution. Furthermore, we saved time on the project, because Uponor could provide us with a chamber that was ready to be installed right away. I’m really looking forward to working with Uponor’s designed solutions department on future projects,” says Finn Christensen.
We saved time on the project, because Uponor could provide us with a chamber that was ready to be installed right away.
Porin ja Harjavallan välille valmistui massiivinen jätevesien siirtoviemäri.
Kuokkalaan avattiin marraskuussa 2013 kehäväylä. Väylälle asennettiin 2 kilometriä Uponorin IQ-hulevesiputkea, 250 kaivoa ja 5 kilometriä salaojaputkea.
Lahti Energia käyttää työmaillaan ensimmäisenä Suomessa kaariputkia. Kokemukset ovat olleet erittäin hyviä.
Lahden Vipusenkadulla uusittiin kaukolämpöverkkoa. Kaivantoon on laskettu isoja kahdentoista ja kuudentoista metrin DN 300 -putkia. Hitsaajat ovat ryhtymässä töihin. Jokin jää kuitenkin askarruttamaan ohikulkijan mieltä.
Samaan aikaan toisaalla, keskustasta Launeelle johtavalla kaukolämpölinjalla operoidaan hieman tuhdimpien DN 400 -putkien kanssa. Täälläkin sama juttu. Aivan kuin kaikki putket eivät olisi ihan suoria?
Butt welding by night of 900 mm pipes ensures stable operation of a district cooling solution in Copenhagen Harbour.
Rapid action was critical when a sewage collector broke in Warsaw, Poland, causing a massive waste spill into the Vistula River. Uponor Infra’s crew worked 24 hours a day in order to stop the pollution of the river. A temporary pipeline was produced, delivered and connected in just eight days.
Thanks to swagelining technology, it was possible to carry out most of the water line modernisation works in the centre of the city of Łódź, in a built-up area, along traffic lanes with heavy traffic of motor vehicles and trams.
Construction of storm water collectors in Nowe Polkowice is one of the stages of a big investment concerning the drainage of the district.
A sea outlet of treated wastewater was initiated in Swarzewo. It is yet another of the many environmentally friendly projects that have recently been carried out in Poland where PE pipes were used.
September 2018 saw the launch of the project for a stormwater drainage system in Rzeszów, almost 26 kilometres long, in the residential District of Budziwój, which partially coincides with the floodplain of the River Wisłok. One of the elements of this system is the retention canal. The project, scheduled for delivery by May 2020, will help to finally solve flooding problems which have been plaguing the residents of this region of Poland.