Underfloor heating and cooling

Tignum dry installation

Uponor Tignum for dry-build underfloor heating and cooling installations with low construction height


A low profile underfloor heating system incorporating chipboard panels with grooves, which is suitable for thin aluminium heat emission plates and PEX pipes. The system comprises of only 2 panels, straight and turning, for a minimal number of installation components.

The system can be used for renovation even room-by-room in occupancy. The installation has no impact on the floor construction and home interior and is immediately ready for final flooring.

“With Uponor Tignum you can carry out the fastest dry-build installation for an underfloor heating system.”

Application areas:


  • Radiant underfloor heating and cooling
  • For dry-build installations
  • Ideal for renovation and new-build in residential homes with wooden or metal joist structures
  • Fits for solid floor constructions (floating floor)
  • For various floor finishes such as tiles, laminate, wood, carpet or vinyl
  • Low floor construction height and low static weight
  • Fits to heat pump use and saves energy compared to dry solutions embedded in lower construction layers
  • Raises coefficient of heat pumps (COP)
  • Very common solution for room after room renovation

 

Specification:


  • Panel dimensions fit to standard joist structure distances of 600 mm
  • Uponor Tignum 17, turning panel with 1220x595x22 mm
  • Uponor Tignum 17, straight panel with 1800x600x22 mm
  • Uponor multi heat emission plate excl. bulgs 17 mm, 1152x185x0.45 mm
  • For use with Uponor Comfort pipe PLUS 17 mm

 

Uponor online catalogue

Benefits of the Tignum underfloor heating system


  • Fast and easy one man installation
  • Flexible: Matching components for customized solutions for all floor types and room geometries
  • Final flooring can be directly done after installation of Uponor Tignum

 

Installation types with Uponor Tignum underfloor heating system

On wooden joists

Installation from bottom to top

  • Installation from bottom to top
  • Insulation
  • Floor beam
  • Uponor Tignum chipboard, height 22 mm
  • Uponor multi heat emission plate
  • Uponor Comfort Pipe PLUS 17
  • Synthetic coated craft paper or PE-foil
  • Finishing floor, e.g. parquet, chipboard, laminate with min. 7 mm

 

On existing floor

Installation from bottom to top

  • Existing floor
  • Uponor Tignum chipboard, height 22 mm
  • Uponor multi heat emission plate
  • Uponor Comfort Pipe PLUS 17
  • Synthetic coated craft paper or PE-foil
  • Finishing floor, e.g. parquet, chipboard, laminate with min. 7 mm

 

Look up or download brochures for Tignum underfloor heating

PDF 2.57MB

PDF 498.09kB

PDF 1.54MB

PDF 2.45MB