UPONOR
Referenzbericht

Johnson Residence, Afton, MN, USA

Minnesota family’s new, healthy “forever home” features PEX-based plumbing and radiant systems

Justin Johnson and his wife, Jessica, had been planning their “forever home” for five years when they decided in late 2019 that they were finally ready to begin construction. Johnson has worked as a union pipefitter in the plumbing and HVAC industries on a variety of commercial, industrial, and residential projects since the mid-1990s. Now, the 25-year industry veteran would have the opportunity to install many of the same comfort-enhancing and energy-efficient systems inside his new, 4,600-sq.-ft. home. 

Construction began in the late spring of 2020. After an incredibly smooth building process, managed by Johnson, who also served as lead installer on the plumbing and heating systems, the couple moved in right before Thanksgiving in 2020. 

Fakten zum Projekt

Afton, MN, USA
Einfamilienhäuser
Fläche: 4,593 sq. ft.
Fertigstellung: 2020

Beteiligung von Uponor

Project highlights

  • Slab-on-grade construction
  • Total area under roof: 4,593 sq. ft.
  • 100,000 Btu/hr heating load | R-40 ceiling, R20 walls, R10 floor
  • Radiant installation: Staple down for both the home and the garage
  • Plumbing installation: Trunk and branch
  • Well system uses a booster pump to generate water pressure of 60 psi
  • Recirculation line installed with a recirculation pump to reduce hot-water delivery times, eliminate water waste, and prevent water stagnation
  • All hot-water and recirculation lines insulated to meet ASHRAE 90.1

Products used

  • Plumbing: 800 feet of Uponor AquaPEX® ranging from ½" to 1¼" with 148 fittings featuring Uponor ProPEX® connection system
  • Radiant heating: 5,462 feet of Wirsbo hePEX™ | 186 fittings | 7 stainless-steel manifolds controlling 27 heating circuits

Veteran pipefitter and longtime PEX installer Justin Johnson chooses Wirsbo hePEX™ (radiant heating) and Uponor AquaPEX® (plumbing) to boost the health, comfort, and energy efficiency of his new home.

In his current role with Metropolitan Mechanical Contractors, Inc. (MMC) of Eden Prairie, Minn., Johnson has frequently installed Uponor PEX systems for plumbing, hydronic distribution, and in-floor radiant heating applications. While on a residential job site for MMC in early 2019, Johnson shared plans for his new home with several Uponor North America (UNA) representatives, including associate product manager Brian Bollenbeck. Shortly afterward, the collaboration formally commenced, with UNA offering not only to provide product, but also to assist in the design and layout of the plumbing and heating systems.

“After using in-floor radiant heating on any number of projects for MMC and experiencing the comfort, efficiency, and health advantages of these systems, I had to have radiant for our new home, no matter what,” says Johnson. “The elimination of dust and dry air through in-floor heating simply just makes for a healthier home.”

Johnson also knew — in somewhat of a departure for a home built in the northern United States — that he wanted the construction to be slab on grade, not the typical basement or crawl-space foundation. The radiant system featured Wirsbo hePEX™ tubing from Uponor — equipped with an oxygen barrier to prevent corrosion of ferrous system components. The install involved loops of tubing stapled down to foam insulation on the concrete slab. In addition, the heating system incorporated multiple zones throughout the structure, including the garage.

“Slab on grade is growing in popularity, especially in our residential development,” continues Johnson, explaining he wanted a single-level house with no stairs. “My other motivation was the in-floor radiant heating itself: Burying the tubing right in the concrete slab is the most efficient approach.”
 

Radiant: Seven comfort zones

Created by Scott Hellendrung, lead design technician for the Uponor Construction Services team, the heating design called for segmenting Johnson’s floor plan into seven zones, each with its own manifold. The entire layout included 27 heating circuits. (There can be more than one PEX loop in a given zone.) The design featured the following zones in the home:

  • Zone 1: Garage 
  • Zone 2: Bedroom #2, including bath, pantry, and hallway
  • Zone 3: Bedroom #3
  • Zone 4: Dinette, kitchen, foyer, office, great room
  • Zone 5: Mud room
  • Zone 6: Master bath, walk-in closet
  • Zone 7: Master bedroom (#1)

Working with Hellendrung, Johnson shared his floor plan, the mapped-out heating zones, and all his heat-loss calculations. “Uponor Construction Services gave us everything we needed, including the accessories, and made it the easiest process,” Johnson says. “I felt well-prepared for the installation after that.”

The in-floor radiant installation process, involving nearly 5,500 feet of Wirsbo hePEX tubing, spanned two days, with Johnson and an MMC colleague doing all the work. On the first day, they completed the main floor of the home, which measured approximately 2,450 sq. ft.; the second day included the 1,800-sq.-ft. garage.

They arranged the tubing in the usual serpentine fashion and stapled it to 2" R-10 polystyrene foam. Once in place, they air tested the PEX and then filled the system with a 50% glycol solution heated to a set point of 117°F by a wall-hung, 110,000-Btu condensing boiler equipped with a 50-gallon storage tank.

Johnson feels so strongly about radiant technology and its benefits, he added it to other areas on his property as well. The glycol solution runs through a heat exchanger to heat a snow-melt system outside the home, and his detached, 2,000-sq.-ft. barn features a separate radiant heating system.

Supplementing the radiant system are two furnaces — one on the main floor and one directly above the garage — for those exceptionally frigid Minnesota winter days. Both units feature humidifiers, and an air exchanger is nearby as well.

The setup serves as a dedicated outdoor air system, designed to bring outdoor air into the home and remove contaminants, allergens, viruses, etc. According to Johnson, “I leave the fan on at low speed just in case the humidity levels need to be corrected.”
 

Plumbing: Benefits of recirculation

The Johnson residence uses a well water system, equipped with a booster pump to maintain pressure of 60 psi. Johnson chose to install a variable-speed well pump, a little different from the pumps usually seen on a well system. The variable-speed pump provided additional efficiencies the family wanted, and its quiet operation added to the benefits.

A small expansion tank with a pressure transducer monitors household water pressure. The pump changes speed in response to pressure changes, which are a function of water demand in the home. For example, if the family is using multiple faucets at once, the pump will accelerate to maintain the desired pressure of 60 psi. In general, the more outlets operating, the more likely the pump will run.

Kou Vang, also a lead design technician with Uponor Construction Services, designed the plumbing system in a trunk-and-branch layout. The design involved approximately 800 feet of Uponor AquaPEX® in diameters from ½" to 1¼" and featured hot-water recirculation, which was another priority amenity for Johnson. Once again, extra comfort, efficiency, and health were the drivers.

The recirculation system consisted of a single circulator with two balancing valves to control the gallons per minute (GPM) to each circuit for the hot water re-circulator and a pair of ½" recirculation lines: one serving the east side of the house and the other serving the west side. A timer governs the recirculation system to move warm water to the various outlets on either side, based on household usage patterns. The water circulates seven hours daily in three time slots: 4 to 8 a.m., 3 to 5 p.m., and 10 to 11 p.m.

“With the half-inch recirculation line, it’s always instant hot water,” says Johnson, explaining the benefits. “The fact that hot water is not constantly circulating means increased efficiency, because no heat is wasted.” Hot-water recirculation also reduces waste on potable water — as well as the energy used to heat it — while waiting for hot water to arrive at the tap.

One of the advantages of PEX is the option to design the pipe with higher flow velocities than copper and CPVC pipe. This allows plumbers to replace size for size despite the smaller inside diameter (I.D.). The smaller I.D. in PEX generates faster water delivery: 15% faster than a same-sized CPVC system and 30% faster than copper. According to the calculations by Uponor Construction Services, Johnson’s trunk-and-branch system would save roughly three-quarters of a gallon of water using PEX versus CPVC and 1.7 gallons versus copper. In other words, that’s how much less water would be lost down the drain every time the fixtures farthest from the water heater called for hot water.

However, Johnson’s decision to go with hot-water recirculation brought even more dramatic water savings. The same PEX trunk-and-branch system, now with hot-water recirculation, cut hot-water delivery time by another 98%. Going from three-and-a-half minutes to five seconds ultimately saved a little over four gallons of water with each activation.

“Besides offering a higher flow velocity compared to CPVC or copper, a PEX system holds a smaller volume of water than the same-sized system using either of these materials in the same pipe diameters,” explains Justin Churchill, residential segment manager, at Uponor. “As a result, Johnson’s household should cycle through that water more quickly. Faster cycling means less water sitting in the line for extended periods. That, in turn, reduces the chances for contaminants and bacteria growing in the system.”

Or, as Johnson sums it up: “This is another key part of the healthy ‘forever home’ we were aiming to build.”
 

A forever home

What is Johnson’s favorite part about his new home? “Where do I start?” he asks.

Well, how about comfort?

“Coming home, slipping off your boots, and walking across the warm floor after a long day’s work is the best. All of our Minnesota neighbors take immediate note of that, too, when they are visiting.”

Another cherished aspect is better health: “Knowing that our home has cleaner air is a big positive,” he continues. “In my experience, this is becoming a major homeowner demand. They want better indoor air quality. Different and thicker filtrations and cleaner air are high values in home building right now, and radiant systems can help supply it.”

Visit a special media resources page for more information: https://uponor.greenhousedigitalpr.com/johnson-residence-afton-mn

Besides offering a higher flow velocity compared to CPVC or copper, a PEX system holds a smaller volume of water than the same-sized system using either of these materials in the same pipe diameters.
— Justin Churchill, Residential Segment Manager, Uponor

Johnson Residence

Exterior finished

Informationen zum Projekt

Informationen zum Projekt

Land
USA
Fertigstellung
2020
Art des Projekts
Neubau
Gebäudetyp
Einfamilienhäuser

Ähnliche Projekte

Einfamilienhaus

Einfamilienhaus

Die Betonkernaktivierung Uponor TABS PE-DIR 40 heizt und kühlt ein Einfamilienhaus in Stettfurt im Kanton Thurgau effizient und zugluftfrei.
Ecovillage

Ecovillage

Learn how the nation’s first carbon-negative, net-zero energy use community used Uponor PEX systems
Underfloor heating for single family home with Comfort E

Underfloor heating for single family home with Comfort E

Uponor’s electric underfloor heating system, Comfort E, was installed to a single family house, built in 1984, during the renovation project. Electric underfloor heating was carried out throughout the house, except for the sauna and shower rooms, which are still under planning.
Getting rid of indoor radon

Getting rid of indoor radon

Uponor's radon system was installed in a detached house in Ilomantsi, completed in 1987. Previously, the radon values in the house were 1,188 becquerels. After installing the system, the radon values dropped to 83.

Renovation of the district heating piping system of six housing companies

Six housing companies located in the Hurttivuori district in Turku have a joint heating plant – Nokikana Oy. The terraced houses, which were built between 1975 and 1977, contain a total of 104 flats. Heating and water are supplied to all flats by a joint heating plant. Renovating the piping system became a necessity due to leaks. The plant's insulated elements were renovated in such a way that all residents were able to live in their homes for the entire duration of the renovation.
D'or Appartements

D'or Appartements

In one of the most beautiful parts of Budapest, at the bottom of the Sas hill, there is this 88 flat condominium called "D'or Appartements", which consists of 3 blocks. On the 1.23 acre property, there are three 5-story blocks of 32, 31 and 25 flats respectively. The most important aspect in the design of the flats was to create ideal living-space, thus homes between 46 m2 and 105 m2 can be found in the buildings.
The plumbing in order in a single day

The plumbing in order in a single day

The 30 years old copper plumbing of the house were replaced with a Uponor composite system. The renovation was over in one day. The contractor for the job was LVI-Dalton Ltd from Klaukkala, Finland.

The plumbing in order in one go

The plumbing in order in one go

Tage and Marjo Mattson decided to renovate their water and radiator plumbing in the fall of 2014. The house was 38 years old then, as were the pipes. In total, the renovation only took a couple of weeks.
Feng Shui home

Feng Shui home

An eco-friendly constructor and a bio-architect teamed up with Uponor Italy to create a balanced combination of new and old, for the perfect indoor climate.
Cottage in Tuscany

Cottage in Tuscany

Near Montevarchi, in the heart of Tuscany, installer Sandro Menga decided to renovate a rural house for his family to live in, using different Uponor solutions.
Wood housing

Wood housing

This "Class A" house is the maximum expression of the words "energy efficiency. This is first "Class A" project outside the Trentino-Alto Adige Region.
Blackmill Doors Windmill

Blackmill Doors Windmill

Gordon Marshall started a wood yard in his local village using reclaimed wood from the Nottingham factories and terraces which were in steep in decline.
Branksome Care Home

Branksome Care Home

Catering for an aging population is without question having an impact on the way companies across the UK market their product to the 'Grey' market.
Cromford Mill

Cromford Mill

Cromford Mill is a 3 bedroom holiday home plus static exhibition. Which has been installed with Uponor PEX Plumbing.
Cythia House

Cythia House

Popping up all over the country in the 60s the somewhat practical ‘boxes’ of the social housing market are iconic fixtures on the British landscape.
Elgin Road

Elgin Road

Due to the flexibility of not needing to be regulated; self builders are discovering that it is possible to install underfloor heating system with relative ease.
Twin Cities home

Twin Cities home

Learn why a Twin Cities homebuilder chooses Uponor plumbing, fire safety and radiant floor heating systems for his own home...
Southwest Homes

Southwest Homes

After Saskatchewan passed the requirement for fire sprinklers in all assisted-living housing, this home needed a solution that would be fast and minimize...
Edelweiss

Edelweiss

See how our radiant heating system contributed to remarkable heating and cooling cost savings, and the first...
Luxury Tiny House

Luxury Tiny House

Learn why Uponor PEX plumbing systems' and their ability to withstand movement made them it a perfect fit for this...
Momentai House

Momentai House

Momentai House is a magnificent luxury home, 5 bedrooms, 4 bathrooms, office, swimming pool area has MLCP UFH, Plumbing and UP36 Weather Compensation.
@SIXTY2

@SIXTY2

23 High Spec Apartments inc. cinema, gymnasium & spa. MLCP Plumbing System is used throughout the project.
Thunderbird, Poole

Thunderbird, Poole

Uponor is proud to be the primary supplier of pipe work and underfloor heating to one of Britain´s most breathtaking buildings: the Thunderbird.
Waters Edge

Waters Edge

The Watersedge development in Weymouth offers all the mod conveniences such as contemporary kitchens and granite work surfaces.
West Bay

West Bay

West Bay in Bridport is a primary example of modern living. It utilises the sustainable technology of underfloor heating and flexible installation plastic pipework.