ProPEX manifold straight adapters
ProPEX manifold adapters for brass manifolds transition from the R32 manifold union nut to 3⁄4", 1", 11⁄4" and 11⁄2" Uponor PEX tubing.
Product search
297 Results found
ProPEX rings
ProPEX rings are required to make ProPEX connections. The 1⁄2" through 3" rings include a leading-edge chamfer and integral stop edge to further simplify the use of ProPEX fittings.
ProPEX stainless-steel male threaded adapters
ProPEX stainless-steel male threaded adapters transition Uponor AquaPEX tubing to reverse-osmosis units. Due to the aggressive nature of conditioned water produced by reverse osmosis, de-ionization and distillation, ProPEX stainless-steel fittings are manufactured from 316 stainless steel, and fully comply with CSA B137.5.Note: ProPEX tool is required. ProPEX rings sold separately.
ProPEX swivel faucet adapters
ProPEX EP and LF brass swivel faucet adapters connect 1/2" Uponor AquaPEX tubing to male NPSM faucet connections.Note: ProPEX tool is required. ProPEX rings sold separately.
ProPEX to MIP lead-free (LF) brass ball valves
ProPEX to MIP LF brass (quarter-turn) ball valves feature a shutoff valve between 1⁄2" Uponor AquaPEX and 1⁄2" MIP. This valve is not compatible with applications using glycol.Note: ProPEX tool is required. ProPEX rings sold separately.
ProPEX (type L) copper branch manifolds
ProPEX 1" copper branch manifolds feature 1/2" ProPEX LF brass outlets brazed to the manifold trunk. Sweat manifolds together to create the desired number of outlets. Do not exceed acceptable flow rates for 1" nominal copper. Note: ProPEX tool is required. ProPEX rings sold separately.
This product is made to order, please contact customer service for lead time.
ProPEX (type L) copper lead-free (LF) valved manifolds
Uponor's 1" Copper Manifold with Lead-free Brass 1⁄2" ProPEX® Ball Valve provides simple and easy isolation of individual loops. Sections can sweat together to extend the number of outlets using a standard 1" copper coupling. Both 1" ends are copper pipe size and require a copper end cap, coupling or transition fitting to make the proper system connection. Do not exceed accepted flow rates for 1" nominal copper.
This product is made to order, please contact customer service for lead time.
ProPEX (type L) lead-free (LF) copper manifolds
Uponor's 1" copper manifold is 6 feet in length and features 24 individual 1⁄2" ProPEX® lead-free brass outlets spaced three inches on center.1 The manifold is suitable for cutting to any length necessary to achieve the desired number of outlets. ProPEX Tool is required. ProPEX Rings are sold separately.
This product is made to order, please contact customer service for lead time.
Protective tubing caps
Protective tubing caps are intended to protect the tubing from debris during the installation phase. Easily installed on and removed from the tubing terminations, they are not for permanent application.Note: Do not use for pressure testing.
Pump relays
Single-zone pump relays control the operation of a single circulator or pump from a 24-volt signal. Relay includes secondary low-voltage terminals for boiler operation.Three-zone multi-pump relays control the operation of up to three pumps or circulators from dedicated 24-volt signals. Relay includes secondary low-voltage terminals for boiler operation and DHW priority options.
PVC bend supports
PVC bend supports provide a rigid, 90-degree bend and sleeve for 3/8", 1/2", 5/8", 3/4" and 1" Uponor PEX tubing runs exiting a concrete slab.
QS-style compression manifold fitting assemblies
QS-style compression fitting assemblies connect 5/16", 3⁄8", 1⁄2" and 5⁄8" Uponor PEX tubing to stainless-steel, brass and EP heating manifolds and R20 fittings. Sold as a three-piece assembly.