EP flow-through opposing-port multi-port tees feature 3/4" ProPEX inlets with opposing 1/2" ProPEX branch outlets. These are designed for a central location to facilitate piping in two directions. The tees are made of EP, which is proven in demanding hot-water applications.Note: ProPEX tool is required. ProPEX rings sold separately.
EP heating manifold actuator adapters connect the four-wire thermal actuators (A3023522) onto the EP heating manifold. This adapter is included with the A3023522 four-wire thermal actuator.
EP heating manifold connection pieces connect the manifold to the supply and return piping. Connection fitting size is an R32 union.
EP heating manifold elbows enable connections to supply and return piping from above or below. The two elbows feature different lengths to accommodate tube spacing for the supply and return lines.
EP heating manifold end caps with vent and drain allow filling and purging at the manifold.
EP heating manifold flow meter valve bodies (0-1 GPM) replace the flow meter valve on the supply manifold.
EP heating manifold isolation valve bodies replace the isolation valve on the return manifold.
EP heating manifold mounting brackets mount manifold assemblies to a wall.
EP heating manifold single sections with balancing valve and flow meter (0-1 gpm) are a single loop add-on used on the supply side for EP heating manifold assemblies (A2670201 through A2670801).
EP heating manifold single sections with isolation valve are a single loop add-on used on the return side for EP heating manifold assemblies (A2670201 through A2670801)
EP heating manifold temperature gauges display the supply and return temperature on the manifold. They snap into the connection piece (A2670032) on the manifold.
