Ecoflex potable PEX plus coils

Ecoflex potable PEX plus is a pre-insulated pipe with a heat trace wire applied on the pipe. This product features a self-regulating heat trace wire with a maximum output of 5W/ft. to keep the water from freezing. The Uponor AquaPEX service pipe in Ecoflex potable plus piping is manufactured by the Engel-method (PEX-a) process and is listed to ASTM F876 and F877. The pipe is surrounded by multi-layer, closed-cell, PEX-foam insulation and a water-resistant, corrugated HDPE jacket, making it ideal for direct-burial applications. Note: Use ProPEX fittings. Codes: UPC, IPC, NSPC, NPC of Canada, National Electrical Code, Canadian Electrical Code Part I Manufacturing standards: ASTM F876, ASTM F877, CSA B137.5, ASTM 1960, NSF/ANSI Standard 41, NSF/ANSI Standard 61 Product listings: cNSFus-pw, PEX 5106, CSA C22.2 No 130-03 (R2012), ANSI/IEEE 515-2011

Ecoflex potable PEX plus coils

Find a distributor

Availability of specific products varies by distributor.

Documents

2 MB

Foam comparison sheet

Learn how unbonded slip systems (Ecoflex) offer advantages over bonded polyurethane (PURR) foam systems, including installation and performance.

1 MB

Uponor Ecoflex potable PEX plus pre-insulated pipe systems installation guide

Installation guide for Uponor Ecoflex potable PEX plus pre-insulated pipe systems. Includes detailed instructions for installing Ecoflex potable PEX plus pre-insulated pipe systems.