Products

EP heating manifolds

EP heating manifold assemblies feature isolation valves and balancing valves with flow meters, and come fully assembled, ready for installation. The manifolds are available in 2- through 8-loop configurations with a maximum flow of 15.4 gpm. The body ends feature R32 unions and the loop outlets have R20 male threads. The manifold mounts on a bracket (A2670006) that comes with the assembly.Pressure and temperature ratings:

87 psi at 140°F (60°C)
72 psi at 158° (70°C)
58 psi at 176°F (80°C)
44 psi at 194°F (90°C)

Note: When mounting EP heating manifolds in a cabinet, use EP heating manifold wall cabinet bracket kits (A2603588). If using glycol, use only propylene glycol. Do not use ethylene glycol.

Blue foam staples

Use blue foam staples with PEX foam staplers (E6025000) to secure ³⁄₈", ¹⁄₂", ⁵⁄₈" and ³⁄₄" Uponor PEX to foam board insulation.

Fixing wires

Uponor Fixing Wire is used to attach Uponor PEX tubing to wire mesh or rebar with the aid of the Fixing Wire Twister or the Ratchet-style Fixing Wire Twister.

Manifold wall cabinets, recessed mount

Uponor Manifold Wall Cabinets, Recessed Mount, are designed to be fitted into a 2x4 or 2x6 wall or opening. The cabinets accommodate Uponor Stainless-Steel Manifolds, Uponor Engineered Polymer (EP) Manifolds, or Uponor Commercial Stainless-Steel Manifolds for use in radiant heating and/or cooling, snow and ice melting, turf conditioning, and permafrost prevention (cold storage) applications.

Manifold wall cabinets, surface mount

Uponor Manifold Wall Cabinets, Surface Mount, are designed to be mounted directly on various surfaces, including concrete block and stud walls. They feature a separable back plate for easy installation and mounting. The cabinets accommodate Uponor Stainless-Steel Manifolds, Uponor Engineered Polymer (EP) Manifolds, or Uponor Commercial Stainless-Steel Manifolds for use in radiant heating and/or cooling, snow and ice melting, turf conditioning, and permafrost prevention (cold storage) applications.

Manifold wall cabinets, replacement parts

Replacement parts for manifold wall cabinets.

Metal bend supports

Metal bend supports (zinc-plated) provide a rigid, 90-degree bend for 3/8", 1/2", 5/8" and 3/4" Uponor PEX tubing.

Metal drop ear bend supports

Metal drop ear bend supports (zinc-plated) provide a rigid, 90-degree bend and connection-free stub out from a stud wall or floor for 3/8" or 1/2" Uponor PEX tubing.

Metal straight-through supports

Metal straight-through supports (zinc-plated) provide rigid straight-through support for 1/2" Uponor PEX tubing as it exits a floor.

Mounting brackets for water meters

Targeted for commercial multifamily sub-metering as well as residential whole-home metering, Uponor's ProPEX water service offering is designed for direct connection to water meters sized ⁵⁄₈" to 1".

PEX clips

PEX clips provide excellent holding power. The 3/8" and 1/2" can attach together laterally for tight installations. PEX clips attach under the wood subfloor for joist-heating applications. The clips prevent the tubing from coming in direct contact with the subfloor, eliminating the possibility of creating uncomfortable hot spots on the floor above. Drywall screws are commonly used to secure the clips to the wood subfloor.Note: Select a screw length that does not penetrate entirely through the wood subfloor once installed.

PEX rails

PEX rails secure Uponor PEX tubing products to metal and wood support structures.Note: Suitable fastening hardware is required (not included).

Accessory type

Applications

Connection type

Controls

Fitting

Manifold size

Material

Pipe

Valves