Environmental Product Declaration (EPD)959 kB1143840
Results for "specification"
85 Results found
Environmental Product Declaration (EPD)941 kB1143845
Uponor EPD_ Combi Pipe in conduit (1143845)
Environmental Product Declaration (EPD)569 kB
Environmental Product Declaration (EPD) - Aqua Pipe in conduit
2.89 MB
Smatrix Pulse Installation and Operation Manual
Smatrix Pulse is a wireless zoning control system designed for radiant heating and cooling installations with the ability to integrate forced-air heating and cooling.
Environmental Product Declaration (EPD)971 kB1143842
Uponor EPD_ Aqua Pipe (1143842)
.jpg?sitename=Global&ext=.jpg&height=420){kind=logo}
2.31 MB
Pavement sensor installation and operation manual
Installation and operation manual for Uponor pavement snow and ice sensor. Includes details on installing and operating Uponor's radiant heating pavement snow and ice sensors.
616 kB
Uponor Supplier Policy
60.53 MB
Radiant Cooling Design Manual (RCDM)
Design with Uponor radiant cooling systems. Find design, installation and inspection information for Uponor's radiant floor, ceiling and wall cooling systems.
617 kB
Thermal actuator instruction sheet
Updated November 2024: Updated wiring diagrams on back to reflect change in actuator wire colors; updated maximum storage temperature to 140°F (60°C); updated maximum inrush current to 200 mA for maximum two minutes
588 kB
PEX Domestic Water Systems Startup and Maintenance Checklist
This checklist applies to Uponor PEX piping products in domestic hot water (DHW), domestic cold water (DCW), and DHW recirculation systems (DHW-R).
638 kB
TruFLOW extension kit instruction sheet
Instruction sheet for Uponor TruFLOW classic manifold extension kit. See how to assemble and install the TruFLOW extension kit for radiant heating systems.
140 kB
Three zone multi-pump relay instruction sheet
Includes wiring instructions. When the thermostat calls for heat, the appropriate circulator is energized and the isolated end switch (X1 and X2) will start the boiler.