Blue foam staples
Use blue foam staples with PEX foam staplers (E6025000) to secure 3⁄8", 1⁄2", 5⁄8" and 3⁄4" Uponor PEX to foam board insulation.
Mounting parts
25 Results found
EP heating manifold mounting brackets
EP heating manifold mounting brackets mount manifold assemblies to a wall.
EP heating manifold wall cabinet brackets
EP heating manifold wall cabinet brackets enable mounting EP heating manifolds in a manifold wall cabinet.
Fixing wires
Uponor Fixing Wire is used to attach Uponor PEX tubing to wire mesh or rebar with the aid of the Fixing Wire Twister or the Ratchet-style Fixing Wire Twister.
Manifold wall cabinets
The recessed-style manifold wall cabinets feature a removable door-trim package and are adjustable to accommodate stainless-steel, brass or EP manifolds mounted in either a 2x4 or 2x6 stud wall. Mount an Uponor zone control module or wireless zoning base unit inside the cabinet for ease of wiring and protection from exposure or possible damage.Note: When recessing the cabinet in a wall, add 1⁄2" to the height and width of the cabinet dimensions (shown in the part description) for easier installation. The adjustable door will cover the additional space surrounding the cabinet.
Metal bend supports
Metal bend supports (zinc-plated) provide a rigid, 90-degree bend for 3/8", 1/2", 5/8" and 3/4" Uponor PEX tubing.
Metal drop ear bend supports
Metal drop ear bend supports (zinc-plated) provide a rigid, 90-degree bend and connection-free stub out from a stud wall or floor for 3/8" or 1/2" Uponor PEX tubing.
Metal straight-through supports
Metal straight-through supports (zinc-plated) provide rigid straight-through support for 1/2" Uponor PEX tubing as it exits a floor.
Mounting brackets for water meters
Targeted for commercial multifamily sub-metering as well as residential whole-home metering, Uponor's ProPEX water service offering is designed for direct connection to water meters sized 5⁄8" to 1".
PEX clips
PEX clips provide excellent holding power. The 3/8" and 1/2" can attach together laterally for tight installations. PEX clips attach under the wood subfloor for joist-heating applications. The clips prevent the tubing from coming in direct contact with the subfloor, eliminating the possibility of creating uncomfortable hot spots on the floor above. Drywall screws are commonly used to secure the clips to the wood subfloor.Note: Select a screw length that does not penetrate entirely through the wood subfloor once installed.
PEX rails
PEX rails secure Uponor PEX tubing products to metal and wood support structures.Note: Suitable fastening hardware is required (not included).
PEX stand-up brackets
PEX stand-up brackets are used in residential slab or commercial multi-floor construction. Secure the bracket to the deck form. Then install the 1/2" PEX tubing in the bracket, either with the 1/2" PEX tubing alone or the 1/2" PEX tubing sleeved inside a corrugated polyethylene carrier tube. The brackets are available in either single- or five-tube configurations.