- Emitter made of 16 x 2,0 mm Uni Pipe PLUS with 10 pipe rows and up to 37,3 m per m² module.- For grid distances of CD-profiles of 333mm- The pipe is 100% diffusion-resistant according to DIN 4726.- Cooling capacity according to EN 14240 (8K) up to 67 W/m²- Heating capacity according to EN 14037 (15K) up to 105 W/m².- Sound absorption according to DIN EN ISO 354 with αw between 0,60 to 0,65.- Capacity and acoustic values depending on gypsum board.
- or lifting, precise height adjustment and stabilising the pipe level relative to the upper reinforcement- for bar thickness up to 4mm- height depending on slab construction.- Material : steel- No. required : 4 per m²
- Patented element is designed that after concreting, the pipes can be pulled out under the ceiling slab and connected to the manifold or supply line below the ceiling.- For pipes up to 20 mm.- Stackable for alignement to other elements.- A small red flag indicates pull direction of the pipe.- Delived including nails for fixing to supports.- Length: 540 mm- Width: 39 mm- Height: 29 mm- Max. height: 57 mm (at the connection point)
- Allows monitoring the test pressure with color code- Apply 4bar- It shows green color while pressure is higher than 2 bar. Below 2 bar is turning yellow and later red.
- for the connection of additional, external cooling/heating or peak load elements- With Q&E connection.- Type 2
- To connect the thermal socket outside the concrete ceiling- With 1/2" FT elbow connecton.- Type 2
- To connect the thermal socket outside the concrete ceiling- With Push 15 elbow connecton with possibility to adapt Uponor actuator- Type 2
- for the connection of additional, external cooling/heating or peak load elements - With 1/2" FT connection- Type octogonal
- To connect the thermal socket outside the concrete ceiling- With 1/2" FT elbow connecton.- Type: octogonal
- empty modules without pipes- for on-site installation of the piping
.jpg?sitename=Global&ext=.jpg&height=424){kind=logo}