Catalogue

- bar
- High dimensional stability, low expansion rates
- Increased flexibility
- 100% oxygen barrier

- coil
- High dimensional stability, low expansion rates
- Increased flexibility
- 100% oxygen barrier

- coil
- Insulation thickness 6 mm
- thermal conductivity λ=0,035 W/m*k
- round extruded

- Insulation thickness 10 mm
- thermal conductivity λ=0,035 W/m*k
- round extruded

- Insulation thickness 13 mm

- coil
- pipe in conduit

Uponor Uni-Pipe PLUS pipes 'Pipe-in-Conduit' should be used in solid foors to comply with the Water Regulations (water fittings) 1999. No ducting is necessary and pipes can subsequently be withdrawn and replaced if required. Uponor multi-layer pipes are not affected by standard concrete or screeds.

- Easy opening with screwdriver
- Series connection of clips possible
- Fixing to the ground by screws diameter max. 5mm

- Easy opening with screwdriver
- Series connection of clips possible
- Fixing to the ground by screws diameter max. 5mm

- coil
- High dimensional stability, low expansion rates
- Increased flexibility
- 100% oxygen barrier

- bar
- High dimensional stability, low expansion rates
- Increased flexibility
- 100% oxygen barrier

- coil
- Insulation thickness 6 mm
- thermal conductivity λ=0,040 W/m*k
- round extruded