Catalogue

- Pipe straightener is not compatible with the Uponor uncoiler
- Tool must be clamped to enable coil to be drawn through the guide rollers

- Tool kit consists of:
- UPONOR MLC PIPE CUTTING TOOL 25-63
- UPONOR MLC BENDING SPRING OUTSIDE 16
- UPONOR S-PRESS JAW UPP1 16
- UPONOR S-PRESS JAW UPP1 20
- UPONOR S-PRESS JAW UPP1 25
- UPONOR SPI S-PRESS TOOL CASE
- UPONOR MLC BENDING SPRING OUTSIDE 20
- UPONOR MLC BENDING SPRING OUTSIDE 25
- UPONOR MLC PIPE CUTTING TOOL 14-25
- UPONOR MULTI PIPE & CONDUIT CUTTING TOOL 12-25
- UPONOR MULTI PIPE CUTTING TOOL 25-63

- For use in combination with exchangeable inserts
- Supplied in case without exchangeable inserts

- Press inserts for manual pressing tool

- Uponor S-Press tool Mini² supplied in carrying case, complete with battery and charger unit.
- Pressing range of up to 32 mm.

- Technical specifications:
- Very quick pressing thanks to short pressing cycle of 3-4 seconds
- Crimping force: linear thrust of approx. 15 kN
- Battery capacity: High-power Makita 1.5 Ah Li-Ion battery (3.0 Ah optional)
- Charging time: 1.5 Ah 15 min. 3.0 Ah 22 min
- Weight incl. battery: without jaws 1.7 kg
- Dimensions tool: 377 x 75 x 116 mm
- Revolving/rotatable: approx. 350° rotating pressing jaw holder

- supplied in carrying case, complete with battery and charger unit
- without pressing jaws.
- Range of application up to 110 mm.

- Technical specifications:
- Quick pressing due to short pressing cycle
- Crimping force: linear thrust of approx. 32 kN
- Battery capacity: High-power Makita 3.0 Ah Li-Ion battery
- Charging time: 22 min
- Weight incl. battery: without jaw 3.5 kg
- Dimensions tool: 366 x 81 x 317 mm
- Revolving/rotatable: approx. 350° rotating pressing jaw holder

- Battery: 9.6V for Uponor battery pressing tool Mini KSP0.

- Battery 18 V / 1.5 Ah, Li-Ion (27 Wh)
- Battery voltage: 18 V
- Battery capacity: 1.5 Ah
- Charging time: With SPI S-Press Battery Charger: 15 min
- Cell technology: Li-ion
- Weight: 0,4 kg

- For the battery powered pressing machine UP 75
- Not compatible to the Ni-Cd charger unit.

- Akku 18 V / 3,0 Ah, Li-Ion (54 Wh)
- Battery voltage: 18 V
- Battery capacity: 3.0 Ah
- Charging time: With SPI S-PRESS BATTERY CHARGER: 22 min
- Cell technology: Li-ion
- Weight: 0,6 kg

- For the re-charging battery of pressing machine UP 110 and Mini KSP0

- Quick-charger for 18V Li-Ion batteries, 230 V
- Charging time: 1.3 Ah 15 min, 3.0 Ah 22 min
- Mains supply: 230 V AC
- Voltage range: 18 V
- Weight: 1,0 kg