Catalogue

Description: pressure gauge connection on both sides, gunmetal filter cup, with unions
Temperature: max. 70°C
Nominal pressure: PN25
Material: gunmetal, stainless steel, EPDM, plastic
Factory setting: 600 kPa (6 bar), adjustable on site 600 - 1000 kPa (6 - 10 bar)
Connection: male thread

Temperature: 90°C
Nominal pressure: PN10
Material: gunmetal
Factory setting: 600 kPa (6 bar)
Connection: inlet male thread, outlet female thread

Description: Master for max. 50 Hycleen AS Controller
Consisting of: touchscreen 10.1", power supply, 2 plugs M12 for 2x 300m cable (500m with powerbox), 2 Rj45 jacks (Ethernet), 2 USB connections (read/write), USB jack (read only), relay output, screw set

Temperature: max. 90°C
Nominal pressure: PN10
Material: gunmetal lead-free, stainless steel, EPDM
Factory setting: 20°C (adjustable 0 - 90°C)
Connection: screw connection
Note: Flushing valve JRG LegioTherm K must not be used without the consent of the holder of patents EP 1 845 207 B1 and DE 10 2006 017 807 B4 for use in a water system of the type described in these patents.

Description: For serial connection of Hycleen Automation System components (master, controller), incl. 2x M12 plugs, ROHS

Description: to 1300-1333, 1350-1363, 2100-2110, 2113, 2130-2140, 2143, 8201.402,
9601.040, 9606.040, 9695.480, 6214-6215
Supplied with: flat gasket AFM34
Material: brass
Connection: male thread

- Emitter made of 16 x 2,0 mm Uni Pipe PLUS with 10 pipe rows and up to 37,3 m per m² module.
- For grid distances of CD-profiles of 333mm
- The pipe is 100% diffusion-resistant according to DIN 4726.
- Cooling capacity according to EN 14240 (8K) up to 67 W/m²
- Heating capacity according to EN 14037 (15K) up to 105 W/m².
- Sound absorption according to DIN EN ISO 354 with αw between 0,60 to 0,65.
- Capacity and acoustic values depending on gypsum board.

- or lifting, precise height adjustment and stabilising the pipe level relative to the upper reinforcement
- for bar thickness up to 4mm
- height depending on slab construction.
- Material : steel
- No. required : 4 per m²

- Patented element is designed that after concreting, the pipes can be pulled out under the ceiling slab and connected to the manifold or supply line below the ceiling.
- For pipes up to 20 mm.
- Stackable for alignement to other elements.
- A small red flag indicates pull direction of the pipe.
- Delived including nails for fixing to supports.
- Length: 540 mm
- Width: 39 mm
- Height: 29 mm
- Max. height: 57 mm (at the connection point)

- Allows monitoring the test pressure with color code
- Apply 4bar
- It shows green color while pressure is higher than 2 bar. Below 2 bar is turning yellow and later red.

- for the connection of additional, external cooling/heating or peak load elements
- With Q&E connection.
- Type 2

- To connect the thermal socket outside the concrete ceiling
- With 1/2" FT elbow connecton.
- Type 2