Catalogue

- Made of brass

- Max.temp.limiter 5-60°C for pump stop

- For pump groups: Push 23, MPG and KRS 6

- Controller with autobalance function for 230V standard wiring
- Supports up to 6 thermostats (230V)
- Supports up to 12 actuators (230V), with 2 actuators at a time that follow a common thermostat (6x 2 actuators)
- Noiseless actuator switching
- Autobalancing in heating optimises energy use and comfort
- Switch to enable/disable the autobalance function
- Pump relay
- Time limit by-pass with autobalance
- Input: day/night switch
- 4 wires for thermostat connection
- Works with 3 wires thermostat (2 wires for power supply 230 V, 1 output 230 V demand) and 4 wires
- thermostat for full functionality (day/night signal)
- Connection terminals for thermostat/actuator 0,13 ... 1,5 mm²
- Overload protection
- Protection class: IP20

- Consisting of:
- Uponor Base controller X-60
- Without power cable
- Mounting material, DIN rail included

- Supports up to 8 thermostats
- Supports up to 16 actuators
- Pump control
- Boiler control
- Night set back, 2 time zones
- Overload protection
- Optional: 2 time zone night setback if connected to timer (1002133 sold seperately)
- Effective power per TA 230: 3W
- Protection class: IP20

- Consisting of:
- Uponor Base controller box 8X
- Connection port for time clock
- Cable clambs
- Mounting material

- Printed scale on dial thermostat
- Simple on/off control (bimetal)
- Setting range can be limited mechanically by moving pins under the dial
- Powered by base unit (Uponor Base controller X-23)
- Setpoint range: +5°C - +30°C
- Wire: 4x 1.5mm²
- max. cable length: 100m
- Protection class: IP30
- Colour: RAL 9010

- LCD display presents temperature in big sized digits
- Silent operation due to triac electronics
- Capacitive keys on the front and full display glass for easy cleaning
- Comfort / Eco mode
- Valve exercise
- Option to connect remote sensor 1071684 (ordered seperately )
- Floor sensor modes: internal, external, internal + external
- Mounting: on wall and on standard European flush mounting box
- Easy wiring with Uponor Base X-23 and Uponor Base flexiboard X-24, X-25, X-26, X-27
- Protection class : IP30

- In-side port for floor/remote sensor connection
- Fully programmable - 5/2 or 7 day with four heat levels per day
- Multiple control choice - air only, floor only, air and floor
- Holiday mode with override feature
- Optimised start
- Lock facility - tamper proof setting
- Status display on current thermostat mode
- Powered by base unit (Uponor Base controller X-23)
- Optional: remote sensor 1047459 (sold seperately)
- Setpoint range: +5°C - +35°C
- Protection class: IP20
- Colour: RAL9010

- Remote sensor for T-26 or thermostat 1047457
- For min/max floor temperature
- Length: 3m

- Establishes connection between Uponor Smatrix Pulse system, Uponor Smatrix Pulse app and the Uponor cloud

- Compatible with:
- Uponor Smatrix Base controller Pulse X-245 Bus 6X
- Uponor Smatrix Wave controller Pulse X-265 6X
- Power supply: RJ45 cable to Uponor Wave or Base controller Pulse
- Ethernet interface: 10/100 Mbps (RJ45)
- Ethernet protocols: Ethernet II
- Protection class: Class II IP20
- Colour: white

- Consisting of:
- Uponor Smatrix Pulse com R-208
- Adaptor for DIN rail installations
- RJ45 connection cable (2m)
- First step instructions, safety instructions
- Mounting material

- Interface to a heating/cooling source
- Switch over H/C between Uponor Smatrix and H/C source
- Incl. socket for DIN rail mounting, manual, mounting material, wall box
- Contact: 2 change-over (CO)
- Ucoil: 230VAC
- Test voltage: 5kV
- Protection class: IP40
- Switching voltage: 380VAC, 125VDC
- Switching current: 5A@250VAC, 5A@30VDC
- Contact material: Ag+Au plated
- Temperature range: -40°C - +70°C

- Interface to a heating/cooling source
- Switch over H/C between Uponor Smatrix and H/C source
- Incl. socket for DIN rail mounting, manual, mounting material
- Contact: 2 change-over (CO)
- Ucoil: 24VDC
- Test voltage: 5kV
- Protection class: IP40
- Switching voltage: 380VAC, 125VDC
- Switching current: 5A@250VAC, 5A@30VDC
- Contact material: Ag+Au plated
- Temperature range: -40°C - +70°C