Maarliefst 300.000 meter Uponor Comfort Pipe gelegd.
Uponor participates in construction of Maarjamõisa Medical Campus, Tartu, Estonia
Uponor participates in construction of Maarjamõisa Medical Campus
Toomas Kivastik, the project manager of Maarjamõisa Medical Campus, points out that Tartu University Hospital is the only university hospital in Estonia and the only one to cover the full range of medical services available in the country. Additionally, the hospital is a venue for pre-graduate medical training and residency, as well as being the centre where most of the medical research in Estonia is conducted.
The direct objective of the second construction phase of the Medical Campus is to complete and start using units J, K and L of the active medical care complex by the end of 2015. These units will house a state-of-the-art oncology centre. Two new generation linear accelerators will be purchased for radiation therapy, and capacity to fit up to four accelerators will be built.
The second construction phase will also see the completion of an eye clinic, operating theatres, an intensive care unit for the cardiac surgery department and internal medicine department. Building requirements for all of these medical care units are extremely strict and technically complicated.
Improving the quality of medical assistance
According to Toomas Kivastik, the entire Estonian population will benefit from the completion of the Campus. As a medical institution of the highest order, it will welcome patients from across the country and significantly improve the quality and speed of medical care in Estonia.
Kivastik adds that the wall heating used in campus buildings will ensure that patients are treated in comfortable rooms with very clean air. Due to the paramount importance of clean water, specialised solutions ensure that medical personnel have access to it at all times. In addition to other requirements, particular attention has been paid to environmental protection and sustainability throughout both planning and construction phases of the complex.
Betrokkenheid van Uponor
The task entrusted to Uponor Estonia was to provide the medical campus with the best solution for water pipelines. The company’s unit manager Aivar Sigur says that this is one of the most interesting and important projects for Uponor Estonia, both in terms of the object and the pipe solutions.
It is the largest construction in Estonia to install the Pe-Xa water supply system. Other Uponor products used in Campus construction are the Comfort Pipe Plus underfloor heating pipeline (20 mm) and ice melting pipes (25 mm), as well as large diameter Pe-Xa pipes and the Quick & Easy connection system.
Uponor Estonia has served as a partner to this construction project during several stages: first the company cooperated with the representatives of the owners and engineers, now it is advisor to the installers until the completion of works.
Joonas Vaabel from the engineering company VP Projekt emphasises that the pipes used for the water supply systems in the Medical Campus and the material of these pipes must meet all health protection requirements. He adds, “Compared to a regular office or public building, there are many special water supply systems on the Medical Campus and water is treated on site (softened water, reverse osmosis water, water for dialysis machines, cooling water for linear accelerators). The height of the building means that several groups of pumps must be used.”
Uponor’s water supply systems were selected for their flexibility and on-site availability as this ensures a smooth construction process.
Andrus Saarik from the installation company RTE Torutööd highlights Uponor’s expertise and its role in technical support, “There are many different and unique situations in construction, and cooperation is very important in order to resolve these. Uponor’s support in the construction of the Medical Campus has been second to none. I look forward to our continuing successful partnership. The solutions have been perfect and we will be choosing them again. At the moment, I don’t see an alternative to Uponor on the market in terms of quality.”
According to Saarik, Uponor Estonia is an excellent partner, “Our cooperation has been long-term; it has been going for over 15 years. Solutions and development have both been significant. In addition, the quality of their products coupled with continuous training have ensured high quality installation.”
Shanghai sheshan yard developed by Lujin company is a high-grade hardcover residential area with a total area of 42000 square meters, 540 apartments.
Shanghai sheshan yard developed by Lujin company is a high-grade hardcover residential area, which is located in Shanghai,songjiang district, with a total area of 42000 square meters, 540 apartments.
High quality and comfort were the guiding principles when desinging the heating solution. All appartments have Uponor's radiant heating and cooling system which is connected to building's automation system.
Riser Port modular system was installed to new multi storey building in Helsinki for smooth and fast installation of plumbing, ventilation and sewer riser lines.
Reno Port solution was selected to routing for tap water and sewer pipelines in wooden multi storey buildings in Turku
The luxury flats by the Töölönlahti bay remain at the ideal temperature thanks to underfloor heating and cooling
Ewha Womans University had planned the underground campus, which is a global trend for space creation, in order to solve the problem that the available space on the ground was insufficient despite the increase in the space demand in the campus, in accordance with the Ewha Womans University Development Plan in the 21st century.
The industrial heritage "Mapo Oil storage facility" converted into a comprehensive cultural park with Uponor Radiant Heating and Cooling system.
"Beržų Terasos" (Birch Terraces) - nature surrounded 10,600 m2 sized multi storey apartment buildings in Vilnius Antakalnis district.
To help address the housing shortage in Derby, an office block (Norman House) has been converted into 134apartments. As part of the conversion, electric heating, mains cold water distribution systems and hot water cylinders were installed in each room.
As a result, Uponor now offers a new, optimized and well structured, compact and easy to use prefab basic unit with flexible connectivity options for managing water and heating in varying types of housing.
From now on, Uponor provides the construction market with these prefab shaft units, primarily intended for modern floor building and terraced houses.
Residencial Escalonia I, II and III. Las Rozas (Madrid), Spain