Wall sleeves with heat shrink seal kits offer a simple installation for new-block construction or existing walls with irregular holes. The wall sleeve is not engineered for specific bearing loads, but offered for installation convenience and compatibility.
Uponor Fixing Wire is used to attach Uponor PEX tubing to wire mesh or rebar with the aid of the Fixing Wire Twister or the Ratchet-style Fixing Wire Twister.
Metal bend supports (zinc-plated) provide a rigid, 90-degree bend for 3/8", 1/2", 5/8" and 3/4" Uponor PEX tubing.
Metal drop ear bend supports (zinc-plated) provide a rigid, 90-degree bend and connection-free stub out from a stud wall or floor for 3/8" or 1/2" Uponor PEX tubing.
Metal straight-through supports (zinc-plated) provide rigid straight-through support for 1/2" Uponor PEX tubing as it exits a floor.
PEX clips provide excellent holding power. The 3/8" and 1/2" can attach together laterally for tight installations. PEX clips attach under the wood subfloor for joist-heating applications. The clips prevent the tubing from coming in direct contact with the subfloor, eliminating the possibility of creating uncomfortable hot spots on the floor above. Drywall screws are commonly used to secure the clips to the wood subfloor.Note: Select a screw length that does not penetrate entirely through the wood subfloor once installed.
PEX rails secure Uponor PEX tubing products to metal and wood support structures.Note: Suitable fastening hardware is required (not included).
PEX stand-up brackets are used in residential slab or commercial multi-floor construction. Secure the bracket to the deck form. Then install the 1/2" PEX tubing in the bracket, either with the 1/2" PEX tubing alone or the 1/2" PEX tubing sleeved inside a corrugated polyethylene carrier tube. The brackets are available in either single- or five-tube configurations.
PEX wall support brackets provide rigid, straight-through support for 1/2" or 3/4" Uponor AquaPEX tubing and 1/2" copper stubs. It features fixed, 2" on-center spacing, and allows the 1/2" Plastic Bend Support (A5250500) to snap into place for 1/2" Uponor AquaPEX tubing as it exits a wall.
PEX-a pipe supports are made of 23-gauge, galvanized steel and are available in 1/2" to 3-1/2" sizes for suspended commercial plumbing and hydronic piping applications, enabling extended support spacing. Each package quantity contains 15 support straps (i.e., three support straps per 9-ft. length).
Plastic bend supports (glass-reinforced nylon) provide a rigid, 45-degree bend and sleeve for 1/2" and 3/4" Uponor PEX tubing.
