Uponor Smatrix Base PRO gateway module R-147 KNX
- Connects a Uponor Smatrix Base PRO controller X-147 with a BMS or third-party KNX devices - Power supply: 230VAC (+10%/-15%) / 50/60Hz - Internal fuse: T5 F3.15AL 250V, 5x20 3.15A quick acting - Operating temperature: 0°C - +45°C - Storage temperature: -20°C - +70°C - Max. consumption: 45W - Power connection: 1m cable with europlug - Connection terminals for system bus: 0.2mm² - 1.5mm² - Protection class: IP20 IIFunctions: - Room temperatur from Uponor Base or third-party KNX thermostats - Room setpoint from Uponor Base or third-party KNX thermostats - Room relative humidity from Uponor Base or third-party KNX thermostats - Room floor temperatur from Uponor Base or third-party KNX thermostats - Actuator status from Uponor Base or third-party KNX system - Forced ECO from Uponor Base PRO or third-party KNX system - Pump output from Uponor Base or third-party KNX system - Boiler output from Uponor Base or third-party KNX system - Heating/cooling curve settings/circuit from Uponor Move PRO to BMS or vice versa - Heating/cooling modes from Uponor Base PRO to BMS or vice versaConsisting of: - Gateway module R-147 KNX - Power supply - Mounting set (2 screws and 2 wall plugs) - Quick guide
Item details
Documents
Technical manuals
Approval Certificate
EU declaration of conformity
Installation and Operation Manual Smatrix Base PRO R-147 KNX (1088247)
UPONOR CER CONTROLS AND OTHERS PARTS UKCA UK (1137326)
Uponor DoC Smatrix Base PRO 1087164 INT (1141505)
About
Specification
- Autobalancing optimizing energy use and comfort - Up to 6 room thermostats and 8 actuators (24V) per controller; 6 channel expansion module option (with M-140) - Pump and boiler relays - Valve and pump exerciseSmatrix Base PRO controller X-147 with optional touch screen I-147 and KNX option - Up to 16 controller in one system - Daisy chain wiring or star wiring (with M-141) - Optional: display of controller information and settings (with I-147) - Optional: BMS integration via KNX interface (with R-147 and I-147)Comfort settings comprises (with I-147) -Temperature setback programs for each channel - Max/min temperature limitations and relative humidity control - Holiday settings and automatic summer/winter change - Room bypass function - Advance cooling settings and automatic summer/winter change - Trend visualization (set point vs. room temperature, etc.) - Accessories configuration - Room check function and system diagnosticSmatrix Base PRO controller X-148 Modbus RTURead data points - Temperature: outdoor / room / floor - Humidity level - Status of: actuator / pump / boiler / general purpose input (GPI) - Connection status of thermostat - Dynamic heat curve offset in integrated heat pumpRead and write data points - Room setpoint - Min/max levels for: setpoint / floor temperature - Settings: comfort/eco and autobalancing on/off - Heating/cooling: state / offset - Cooling not allowed for a room - Integrated heat pump defrost state
Application
- Wired room temperature control for radiant heating and cooling- Set point range: +5°C - +35°C
Certification
- CE, EAC
Product drawings
Other
Rendered
