Uponor S-Press PLUS radi crossing insulated
- For cross-over-free connection of a radiator on the raw floor- Incl. insulation box, consisting of upper and lower part made of EPP (expanded polypropylene) with 13 mm insulation layer - (corresponds to 50 % insulation in compliance with EnEV), WLG 035. Meets EnEV requirements in respect of pipe - cross-overs and wall penetrations.- Dimensions of insulation box - (L x W x H): 115 x 115 x 55 mm.
Item details
Uponor S-Press PLUS radi crossing insulated 16-16-16
Uponor S-Press PLUS radi crossing insulated 20-16-16
Uponor S-Press PLUS radi crossing insulated 20-16-20
Documents
Technical manuals
Installation Report MLC leak test report TW water (1120119)
About
Specification
- Unique press indicator foil - Fast 3-step installation (press without bevel) - Innovative QR code for immediate digital access - Colour coded - Fixed press sleeve with inspection windows - Precise jaw location - Fast diameter recognition - Accurate test safety function - 100% backward compatible with existing Uponor components - Flow rate optimized fitting body
Application
Tested/approved according to BS EN ISO 21003 Multilayer piping systems for hot and cold water installations inside buildings for application class 1,2,4,5/10barDomestic water services: The permanent operating temperature from 20°C to 70°C at a maximum permanent operating pressure of 10 bar. The short-term malfunction temperature is 95°C for a period of 100 hours in the operating life time. Domestic cold water services : where the water temperature does not exceed 20°C at a maximum permanent operating pressure of 16bar.Heating: The permanent operating temperature ranges up to 80°C at a maximum permanent operating pressure of 10 bar. The short-term malfunction temperature is 100°C for a period of 100 hours in the operating life time.
Certification
UK Reg4 approval - WRAS or - KIWA to meet the requirements of the Water Supply (Water Fittings) Regulations 1999
Product drawings
Z-drawing
Rendered
Label drawings
