Malleable Fittings

- Backnut, ISO/EN P4
- 'ST' these types of fittings are made from steel (galvanised finish = electroplated).

- Backnut, with one machined face, ISO/EN P4

- Backnut, recessed, ISO/EN P4
- 'ST' made from steel (galvanised finish = electroplated).

- Screwed flange, undrilled
- Plain flange for bespoke patterns or fabrication

- Screwed flange, drilled, 2 holes

- Screwed flange, drilled, 4 holes
- Diameter of pitch circle and sealing face compatible to BS EN 1092-2 and DIN 2566.
- * 4 holes

- Screwed flange, drilled
- Diameter of pitch circle and sealing face compatible to BS EN 1092-2 and DIN 2566.
- * 8 holes

- Union flat seat, ISO/EN U1
- Supplied without sealing gaskets
- a and z1 include the seal thickness as per table "Sealing Gasket Dimension".
- '374 G' refers to the thread size 'G' according to ISO 228 of the union nut 374
- * Inside hexagon

- Union flat seat, ISO/EN U2
- Supplied without sealing gaskets
- b and z2 include the seal thickness as per table "Sealing Gasket Dimension".
- '374 G' refers to the thread size 'G' according to ISO 228 of the union nut 374

- Union flat seat
- Supplied without sealing gaskets
- b and z include the seal thickness as per table "Sealing Gasket Dimension".
- '374 G' refers to the thread size 'G' according to ISO 228 of the union nut 374

- Union flat seat
- Supplied without sealing gaskets
- c + z2 include the seal thickness as per table "Sealing Gasket Dimension".
- '374 G' refers to the thread size 'G' according to ISO 228 of the union nut 374

- Union flat seat
- Supplied without sealing gaskets
- c includes the seal thickness as per table "Sealing Gasket Dimension".
- '374 G' refers to the thread size 'G' according to ISO 228 of the union nut 374