Heating & Cooling Solutions

- supports up to 8 thermostats (230V)
- supports up to 12 actuators (230V)
- rotary channel selector switch for quick actuator assignment
- pump relay 2A (230V)
- overload protection
- power: 10VA
- protection class: IP40

Consisting of:
- Uponor Base flexiboard with pump logic X-27 8X
- mounting material

- printed scale on dial thermostat
- simple on/off control (bimetall)
- setting range can be limited mechanically by moving pins under the dial
- powered by base unit (Uponor Base controller X-23)
- setpoint range: +5°C … +30°C
- wire: 4x 1.5mm²
- max. cable length: 100m
- protection class: IP30
- color: RAL 9010

- printed scale on dial thermostat for flush installation
- simple on/off control (bimetall)
- setting range can be limited mechanically by moving pins under the dial
- powered by base unit (Uponor Base controller X-23)
- setpoint range: +5°C … +30°C
- wire: 4x 1.5mm²
- max. cable length: 100m
- protection class: IP30
- color: pure white, glossy

Consisting of:
- Uponor Base thermostat flush T-24 230V
- outer frame 81x85x44.5mm
- cover 50x50mm

- printed scale on dial thermostat
- simple on/off control (bimetall)
- heating/cooling changeover (2-pipe installation)
- setting range can be limited mechanically by moving pins under the dial
- powered by base unit (Uponor Base controller X-23)
- wire: 4x 1.5mm²
- max. cable length: 100m
- protection class: IP30
- color: ~RAL9010

Consisting of:
- Uponor Base thermostat H/C T-25 230V
- DIP switch for changeover contact heating/cooling

- in-side port for floor/remote sensor connection
- fully programmable - 5/2 or 7 day with four heat levels per day
- multiple regulation control choice - air only, floor only, air and floor
- holiday mode with override feature
- optimised start
- lock facility - tamper proof setting
- status display on current thermostat mode
- powered by base unit (Uponor Base controller X-23)
- optional: remote sensor (sold seperatly 1047459)
- setpoint range: +5°C … +35°C
- protection class: IP20
- color: ~RAL9010

- remote sensor for T-26 or thermostat 1047457
- for min/max floor temperature
- length: 3m

- establishes connection between Uponor Smatrix Pulse system, Uponor Smatrix Pulse app and the Uponor cloud

compatible to:
- Uponor Smatrix Base controller Pulse X-245 Bus 6X
- Uponor Smatrix Wave controller Pulse X-265 6X
- power supply: RJ45 cable to Uponor Wave or Base controller Pulse
- ethernet interface: 10/100 Mbps (RJ45)
- ethernet protocols: Ethernet II
- protection class: Class II IP20
- color: white

Consisting of:
- Uponor Smatrix Pulse com R-208
- adaptor for DIN rail installations
- RJ45 connection cable (2m)
- first step instructions, safety instructions
- mounting material

- interface to a heating/cooling source
- switch over H/C between Uponor Smatrix and H/C source
- incl. socket for DIN rail mounting, manual, mounting material, wall box
- contact: 2 change-over (CO)
- Ucoil: 230VAC
- test voltage: 5kV
- protection class: IP40
- switching voltage: 380VAC, 125VDC
- switching current: 5A@250VAC, 5A@30VDC
- contact material: Ag+Au plated
- temperature range: -40°C...+70°C

- interface to a heating/cooling source
- switch over H/C between Uponor Smatrix and H/C source
- incl. socket for DIN rail mounting, manual, mounting material
- contact: 2 change-over (CO)
- Ucoil: 24VDC
- test voltage: 5kV
- protection class: IP40
- switching voltage: 380VAC, 125VDC
- switching current: 5A@250VAC, 5A@30VDC
- contact material: Ag+Au plated
- temperature range: -40°C...+70°C

- Can be combined with Uponor Smatrix Wave/Base (Pro) thermostats
- Can be combined with T-27 thermostat 1120075
- Can be used as floor or remote sensor
- Length: 3m
- Sensor type: NTC 10kOhm at 25oC

- Wallframe for Uponor Smatrix thermostats (not compatible with T-247 and T-267)
- For thermostats T-247 and T-267 select 1144965 / Uponor Smatrix wallframe T-2XY A-2XX

- Color: white RAL9016