Product Online Catalogue Search

- . Plastic membrane solenoid valve(s), Danfoss; EV228A 18P MIX E UN 000 code no. 042U819101 for Tap water PPM modular manifold system with Bayonet thread, grivory on the base valve unit, sealing in EPDM with silicon free lubricant, latching solenoid 12 V DC.
- 2. Wireless sensor(s) and connection box with sensor tape. wireless sensor and sensor tape, plastic cover, electronic cirquit, 2 AA batteries. The sensor is indicating moisture and sends signal to the control unit.
- 3. Control unit with switches and indicators.

- Made of plated brass
- For connection of Uponor PE-Xa pipes to manifolds
- Female thread 3/4" eurocone acc. to DIN EN ISO 228-1.

- Made of DR brass (lead-free)
- Carton box packaging

- Emitter made of 16 x 2,0 mm Uni Pipe PLUS with 10 pipe rows and up to 37,3 m per m² module.
- For grid distances of CD-profiles of 333mm
- The pipe is 100% diffusion-resistant according to DIN 4726.
- Cooling capacity according to EN 14240 (8K) up to 67 W/m²
- Heating capacity according to EN 14037 (15K) up to 105 W/m².
- Sound absorption according to DIN EN ISO 354 with αw between 0,60 to 0,65.
- Capacity and acoustic values depending on gypsum board.

- clamp track fixation clip
- for pipes 25 mm

- made of PE-LD, for protection of UFH pipes 25mm in areas of expansion joints

- Includes: 2x brackets short, 2x brackets long, 2x filling valve brass, 2x thermometer 0 - 60°C, 1x manometer, 2x endcap, 2x flat sealing screw connection piece with swivel nut, 1x mounting material: 8x screws 6x60mm, 8x plastic anchor 8x40mm, 2x flat sealing 44x32x2

- For connection with additional segments and basic kit
- Supply-segment with control valves for preadjustment
- Return-segment with thermostat upper section incl. cap for locking
- Uponor actuator can be mounted directly on the return
- Heating loop connection for PE-Xa Pipe 25x2,3 with compression adapter

- For connection with additional segments and basic kit
- Supply-segment with control valves for preadjustment and heating loop connection for G3/4 eurocone
- Return-segment with thermostat upper section incl. cap for locking
- Uponor actuator can be mounted directly on the return
- Heating loop connection for G3/4 eurocone

- Made of brass

- Includes: 2x brackets short, 2x brackets long, 1x mounting material: 8x screws 6x60mm, 8x plastic anchor, 8x40mm

- With shut-off function
- Made of fibreglass reinforced Polyamid