Digital Controls

- Measures and displays the perceived room temperature and relative humidity
- Protection class: IP30
- Colour: black

Functions:
- Heating or cooling demand indication
- RH measured value
- Comfort / ECO indication
- ECO setback modification
- Manual H/C switchover function
- Cooling allowed function (room by room)
- Displays celsius or fahrenheit
- Operating modes: room temperature (RT), internal with floor max/min (RFT), remote sensor (RS), remote outdoor (RO)
- Temperature calibration
- Optional: floor sensor can be connected

Consisting of:
- Uponor Smatrix Base thermostat D+RH T-149 Bus
- Mounting material

- Measures and displays the perceived room temperature and relative humidity
- Protection class: IP30
- Colour: white glossy

Functions:
- Heating or cooling demand indication
- RH limit indication
- Individual night setback
- Set time start up wizard
- 6 pre-programmed schedules
- 1 freely programmable schedule
- Cooling allowed function (room by room)
- Displays celsius or fahrenheit
- Operating modes: room temperature (RT), internal with floor max/min (RFT), remote sensor (RS), remote outdoor (RO)
- display with backlight (dims 10 seconds after last button event)
- Displays software version (on power-up)
- Optional: floor or outdoor sensor can be connected

Consisting of:
- Uponor Smatrix Base thermostat Prog.+RH T-148 Bus
- Mounting set

- measures perceived room temperature
- protection class: IP30
- color: white glossy

Functions:
- light indication behind dial after changing the set point
- heating/cooling demand indication
- dip switch to enable/disable timer function if timer installed
- optional: enable/disable timer function

Consisting of:
- Uponor Smatrix Base thermostat standard T-145 Bus POD
- mounting material

- Measures perceived room temperature
- Protection class: IP30
- Colour: white glossy

Functions:
- Potentiometer on rear side to adjust setpoint temperature
- Tamper detector
- Dry contact input for forced ECO via e.g. SMS module or BMS
- Dry contact input for heating/cooling changeover
- Dip switch for function/sensor selection
- Optional: floor, outdoor or remote sensor can be connected

Consisting of:
- Uponor Smatrix Base thermostat public T-143 Bus
- Mounting set

- T-149 surface adaptor for on-wall installation
- Incl. mounting material
- Colour: white RAL9016

- T-149 surface adaptor for on-wall installation
- Incl. mounting material
- Colour: black

- 4-wire bus cable allows to connect Uponor Smatrix Base / Base PRO devices
- 2 wires for power supply / 2 wires for data transmission
- Shielding: aluminium/polyester foil with tracer strand
- Temperature range: -20°C - +80°C
- Cross section: AWG22
- Sheath: PVC
- Rated voltage: 400VAC/DC

- 6 channel slave module for Uponor Smatrix Base controller X-145 Bus 6X and Uponor Smatrix Base PRO controller X-147 Bus 6X and Uponor Smatrix Base pro controller X-148 Modbus RTU
- Supports up to 6 room thermostats and 6 actuators
- Click-in installation
- Protection class: IP20
- Colour: grey

- 6 channel star module for Uponor Smatrix Base controller X-145 Bus 6X and Uponor Smatrix Base PRO controller X-147 Bus 6X
- Flexible wiring approaches possible (star topology)
- Supports up to 6 room thermostats
- Protection class: IP20
- Colour: grey

- Set time start up wizard
- Holiday mode
- Comfort/ECO indication
- Manual H/C switchover function
- 6 pre-programmed schedules
- 1 freely programmable schedule
- ECO setback value setting
- Clock reset
- Timer functions
- Autobalancing de-/activation
- Backlight
- Displays software version on start-up
- Protection class: IP30
- Colour: white glossy

Consisting of:
- Uponor Smatrix Base timer I-143 Bus
- Mounting material

- Supports up to 6 room thermostats and 8 actuators
- Option to extend up to 12 room thermostats and 14 actuators with 1071686
- Max. power input per actuator: 24VAC / 0.2A (0.4A peak)
- Protection class: Class II IP20
- Colour: grey RAL7015

Consisting of:
- Uponor Smatrix Base PRO controller X-147 Bus 6X
- Quick set-up guide, security instructions
- Micro SD card (pre-inserted)
- DIN rail (length: 37cm)
- Mounting material

- Suited for Modbus RTU systems
- Supports up to 6 room thermostats and 8 actuators with option to extend to 12 room thermostats and 14 actuators (use 1071686)
- Contains data points for heat pump integration
- Max. power input per actuator: 24VAC / 0.2A (0.4A peak)
- Protection class: Class II IP20

Consisting of:
- Uponor Smatrix Base PRO controller X-148 Modbus RTU
- Quick set-up guide, security instructions
- DIN rail (length: 37cm)
- Mounting material