- Made of tin-plated brass- With 1" male thread or female threaded ends- 1/2" male thread outlets, compatible with Uponor compression adapters, - and compression-free swivel-nut adapters 1141868 or 1141869
- Made of plated brass- Valves on each circuit- Delivered with service identification tags- Adapters for pipe connection to be ordered separately - Manifolds can be joined to make the required number of outlets- With 3/4" male thread or female threaded ends- 1/2" male thread outlets, compatible with Uponor compression adapters, - and compression-free swivel-nut adapters 1141868 or 1141869
- Relacement cap and service identification tag for Uni-C manifolds
- Supplied as a single bracket - Made of galvanised steel, for fixture of 1" Uni-C manifolds - Sound absorbing rubber mounting - Off-set between top and bottom rails to allow easy routing of pipework
- Supplied as a pair - Made of galvanised steel, for fixture of 3/4" or 1" Uni-C manifolds - Off-set between top and bottom rails to allow easy routing of pipework
- sealing element with elastomer O-ring- designed for closing unused Uni-C connections- resistant to drinking water and aging- suitable for potable water installations
- Made of plated brass- For use to cap open outlets on Un-C manifolds, thread sealant may be required
- For connection of Uni-Pipe PLUS and MLC to Uni-C manifolds - Demountable and resealable - Union nut and insert - Female thread 1/2" to BS EN ISO 228-1 - Pipe must be calibrated, no bevel
- Made of tin-plated brass - Male thread acc.to BS EN ISO 228-1
