Catalogue

Uponor Uni Pipe PLUS white S

- bar
- High dimensional stability, low expansion rates
- Increased flexibility
- 100% oxygen barrier

Uponor Uni Pipe PLUS white

- coil
- High dimensional stability, low expansion rates
- Increased flexibility
- 100% oxygen barrier

Uponor Uni Pipe PLUS white insulated S6 WLS 035

- Coil
- Insulation thickness 6 mm
- Thermal conductivity λ=0,035 W/m*k
- Round extruded
- Fire Class E to BS EN 13501-1

Uponor Uni Pipe PLUS white insulated S6

- Coil
- Insulation thickness 6 mm
- Thermal conductivity λ=0,040 W/m*k
- Round extruded
- Fire Class E to BS EN 13501-1

Uponor Uni Pipe PLUS white insulated S10 WLS 035

- Coil
- Insulation thickness 10 mm
- Thermal conductivity λ=0,035 W/m*k
- Round extruded
- Fire Class E to BS EN 13501-1

Uponor UNI PIPE PLUS white in conduit

- Coil
- Pipe in conduit

Uponor Uni-Pipe PLUS 'Pipe-in-Conduit' should be used in solid foors to comply with the Water Regulations (water fittings) 1999. No ducting is necessary, and pipes can subsequently be withdrawn and replaced if required. Uponor Multilayer pipes are not affected by standard concrete or screeds.