Heating & Cooling Solutions

- Set of spare adapters (2 pcs.) for actuators cooperating with Vario manifolds
- for Vario M, S manifold - 1 psc.
- for Vario PLUS, MAGNA manifold - 1 psc.

- C-Rail for fixation of manifold
- with 5 dominos
- with bolts 6mm, screws, nuts and washers

- Cabinet with door for on-wall installation
- Galvanised steel, white powder coated (RAL 9016)
- Without rear board
- Lockable door with coin lock

- Complete cabinet with frame and door for in-wall installation
- Depth: 110mm, extendable to 150mm
- Hight adjustable: 730 - 930mm
- Floor construction hight: max. 200mm
- Material: galvanized steel
- White powder coated frame and door (RAL 9016)
- Lockable door

- for Push 23

- Integrated pump: Q: 0,1 - 0,4 m³/h, H: 0,2 - 1,1 m, Phyd< 1W
- Bracket for left- or right installation
- Air bleed screw
- Secondary circuit temp. range 20-50°C
- Balancing valve
- Secondary loop 3/4"" eurocone
- Primary valves with clampconnection for CU-Pipe 15mm
- For control of UFH in small zones
- Max. primary temperature: 90°C
- Max. secondary temperature: 55°C
- Pumpgroup with thermostat 12-28°C
- Secondary max. temperature limiter by 50°C
- Room sensor head with capillary sensor

- Integrated pump: Q: 0,1 - 0,4 m³/h, H: 0,2 - 1,1 m, Phyd< 1W
- Bracket for left- or right installation
- Air bleed screw
- Secondary circuit temp. range 20-50°C
- Balancing valve
- Secondary loop 3/4"" eurocone
- Primary valves with clampconnection for CU-Pipe 15mm
- For control of UFH in small zones
- Max. primary temperature: 90°C
- Max. secondary temperature: 55°C
- With cartridge heater for UFH in summer mode
- Room temperature control by controller X-161
- Compatible to Uponor Smatrix Wave thermostats T-166, T-168 , T-169
- With safety sensor against overheating
- Secondary max. temperature limiter by 50°C

- Integrated pump: Q: 0,1 - 0,4 m³/h, H: 0,2 - 1,1 m, Phyd< 1W
- Bracket for left- or right installation
- Air bleed screw
- Secondary circuit temp. range 20-50°C
- Balancing valve
- Secondary loop 3/4" eurocone
- Primary valves with clampconnection for CU-Pipe 15mm
- For control of UFH in small zones
- Max. primary temperature: 90°C
- Max. secondary temperature: 55°C
- Pumpgroup with actuator 230 V and cable room sensor
- Secondary max. temperature limiter by 50°C

- Integrated pump: Q: 0,1 - 0,4 m³/h, H: 0,2 - 1,1 m, Phyd< 1W
- Bracket for left- or right installation
- Air bleed screw
- Secondary circuit temp. range 20-50°C
- Balancing valve
- Secondary loop 3/4" eurocone
- Primary valves with clampconnection for CU-Pipe 15mm
- For control of UFH in small zones
- Max. primary temperature: 90°C
- Max. secondary temperature: 55°C
- Pumpgroup with actuator 230 V, wireless thermostat and wireless receiver
- Secondary max. temperature limiter by 60°C

- Pumpgroup pre-mounted
- Water temperature and flow rates controlled by thermostat with capillary sensor,
- Air bleed screw
- Max. primary temperature: 90°C
- Max. secondary temperature: 55°C
- Balancing valve primary
- Secondary connection G1 (MT)
- For installation left or right of manifold
- Maximal heat load: 10 kW
- kvs flow valve: 1,2 m3/h

- Pre-mounted
- Ball valve+balancing valve primary,
- 3-way-mixing valve without motor drive
- Air bleed screw
- For installation left or right of manifold
- Max. primary temperature: 90°C
- Max. secondary temperature: 55°C
- Connection G1 (MT) secondary

- Pre-mounted
- Fluvia Move pump groups with supply temperature controller Uponor Smatrix Move
- Fluvia T can be installed with brackets left or right on the installation
- Max. primary temperature: 90°C
- Max. secondary temperature: 55 - 60°C
- For installation in central distribution room
- Nominal heat output: 15 kW
- Pump Wilo Para: Q: 0,1-2,5 m³/h, H: 6-2,4 m, EEI 0,17
- Primary connection Rp1 (FT)
- Secondary ball valves with thermometer, connection Rp1 (FT)
- Uponor variable kvs-value and Uponor Smatrix move controler can be adapted