- measures perceived room temperature- designed for in-wall box installation including frame- different frames can be used for installation in a switch rail frame- protection class: IP30- color: white glossy- Functions:- heating/cooling demand indication- dip switch to enable/disable timer function if timer installed- Consisting of:- Uponor Smatrix Base thermostat flush T-144 Bus- mounting material- outer frame
- set time start up wizard- holiday mode- comfort/ECO indication- manual H/C switchover function- 6 pre-programmed schedules- 1 freely programmable schedule- ECO setback value setting- clock reset- timer functions- Autobalancing de-/activation- backlight- displays software version on start-up- protection class: IP30- color: white glossy- Consisting of:- Uponor Smatrix Base timer I-143 Bus- mounting material
- room temperature and relative humidity sensor (flush mounted)- protection class: IP30- color: white RAL9016- Consisting of:- Uponor Smatrix Base PRO room sensor+RH Style T-141 Bus- mounting material
- 4-wire bus cable allows to connect Uponor Smatrix Base / Base PRO devices- 2 wires for power supply / 2 wires for data transmission- shielding: aluminium/polyester foil with tracer strand- temperature range: -20°C ... +80°C- cross section: AWG22- sheath: PVC- rated voltage: 400VAC/DC
- supports up to 6 room thermostats and 8 actuators- option to extend up to 12 room thermostats and 14 actuators with 1071686- max. power input per actuator: 24VAC / 0.2A (0.4A peak)- protection class: Class II IP20- color: grey RAL7015- Consisting of:- Uponor Smatrix Base PRO controller X-147 Bus 6X- quick guide, security instructions- micro SD card (pre-inserted)- DIN rail (length: 37cm)- mounting material
- connects a Uponor Smatrix Base PRO controller X-147 with a BMS or third-party KNX devices- power supply: 230VAC (+10%/-15%) / 50/60Hz- internal fuse: T5 F3.15AL 250V, 5x20 3.15A quick acting- operating temperature: 0°C ... +45°C- storage temperature: -20°C ... +70°C- max. consumption: 45W- power connection: 1m cable with europlug- connection terminals for system bus: 0.2mm² ... 1.5mm²- protection class: IP20 II- Functions:- room temperatur from Uponor Base or third-party KNX thermostats- room setpoint from Uponor Base or third-party KNX thermostats- room relative humidity from Uponor Base or third-party KNX thermostats- room floor temperatur from Uponor Base or third-party KNX thermostats- actuator status from Uponor Base or third-party KNX system- foreced ECO from Uponor Base PRO or third-party KNX system- pump output from Uponor Base or third-party KNX system- boiler output from Uponor Base or third-party KNX system- heating/cooling curve settings/circuit from Uponor Move PRO to BMS or vice versa- heating/cooling modes from Uponor Base PRO to BMS or vice versa- Consisting of:- gateway module R-147 KNX- power supply- mounting material (2 screws and 2 wall plugs)- quick guide
- 6 channel slave module for Uponor Smatrix Base controller X-145 Bus 6X and Uponor Smatrix Base PRO controller X-147 Bus 6X and Uponor Smatrix Base pro controller X-148 Modbus RTU- supports up to 6 room thermostats and 6 actuators- click-in installation- protection class: IP20- color: grey
- sparepart touchpanel for Uponor Smatrix Base controller X-147 Bus 6X- protection class: Class II IP20- color: white RAL9016- Consisting of:- Uponor Smatrix Base PRO interface I-147- power supply- mounting material- wall bracket- instruction leaflet
- establishes connection between Uponor Smatrix Pulse system, Uponor Smatrix Pulse app and the Uponor cloud- compatible to:- Uponor Smatrix Base controller Pulse X-245 Bus 6X - Uponor Smatrix Wave controller Pulse X-265 6X- power supply: RJ45 cable to Uponor Wave or Base controller Pulse- ethernet interface: 10/100 Mbps (RJ45)- ethernet protocols: Ethernet II- protection class: Class II IP20- color: white- Consisting of:- Uponor Smatrix Pulse com R-208- adaptor for DIN rail installations- RJ45 connection cable (2m)- first step instructions, safety instructions- mounting material
- interface to a heating/cooling source- switch over H/C between Uponor Smatrix and H/C source- incl. socket for DIN rail mounting, manual, mounting material, wall box- contact: 2 change-over (CO)- Ucoil: 230VAC- test voltage: 5kV- protection class: IP40- switching voltage: 380VAC, 125VDC- switching current: 5A@250VAC, 5A@30VDC- contact material: Ag+Au plated- temperature range: -40°C...+70°C
- interface to a heating/cooling source- switch over H/C between Uponor Smatrix and H/C source- incl. socket for DIN rail mounting, manual, mounting material- contact: 2 change-over (CO)- Ucoil: 24VDC- test voltage: 5kV- protection class: IP40- switching voltage: 380VAC, 125VDC- switching current: 5A@250VAC, 5A@30VDC- contact material: Ag+Au plated- temperature range: -40°C...+70°C
- Can be combined with Uponor Smatrix Wave/Base (Pro) thermostats- Can be combined with T-27 thermostat 1120075- Can be used as floor or remote sensor- Length: 3m- Sensor type: NTC 10kOhm at 25oC
