Heating & Cooling Solutions

- Wallframe for Uponor Smatrix thermostats (not compatible with T-247 and T-267)
- For thermostats T-247 and T-267 select 1144965 / Uponor Smatrix wallframe T-2XY A-2XX

- Color: white RAL9016

- Wallframe for Uponor Smatrix thermostats T-247 and T-267
- Color: white RAL9016

- supply water temperature controller
- control mode: heating only
- control principle: outdoor temperature compensation

- Functions:
- mixing valve activation
- weekly program with 9 pre-programmed schedules
- 4 freely programmable schedules
- pump logic as stand alone
- pump logic in combination with Uponor Smatrix Base or Wave controller
- real time information of supply, outdoor and room temperature
- real time information of mixing valve status
- real time information of current day shown in a graph (comfort and reduced temperature)

- Options:
- DHW production and boiler control
- HW heating circuit
- up to 100°C supply water control
- 2 powered general purpose outputs
- 2 general purpose inputs
- security contact thermostat
- 230V mixer motor

- Content:
- Uponor Smatrix Move controller H
- supply/return sensor
- outdoor sensor
- protection class: IP30 II
- color: dark grey

- sparepart antenna for Uponor Smatrix Move controller
- allows wireless connection to Uponor Smatrix Wave thermostats

- Content:
- Uponor Smatrix Move antenna
- connection cable
- mounting material
- additional conformity: EAC

- supply/return sensor
- measures supply or return temperature
- sensor type: NTC 10 kΩ at 25 °C
- length: 3m
- protection class: IP68 II

- measures outdoor temperature
- incl. mounting material
- can be combined with Uponor Smatrix Wave/Move controller
- optional wireless connection, if combined with Uponor Smatrix Wave Thermostat Public
- protection class: IP55
- sensor type: NTC 10kOhm at 25°C
- color: light grey

- 3-point control
- for Uponor Smatrix Move controller

- room sensor
- measures room temperature
- for indoor heating and cooling zones with indoor compensation
- 2-wire connection to Uponor Smatrix Move PRO controller X-159
- sensor type: NTC10
- temperature range: 0°C … +60°C
- protection class: IP20

- room sensor + RH
- measures relative humidity for dew point calculations
- for cooling only and heating and cooling zones
- 3-wire connection to Uponor Smatrix Move PRO controller X-159
- humidity range: 0-100% non-condensing
- accuracy: < 2% RH
- operating voltage: 24V / 50-60 Hz
- operating temperature: -10°C … +50°C
- protection class: IP20

- Controller with autobalance function for 230V standard wiring
--- supports up to 6 thermostats (230V)
--- supports up to 12 actuators (230V), with 2 actuators at a time that follow a common thermostat (6x 2 actuators)
--- noiseless actuator switching
--- autobalancing in heating optimises energy use and comfort
--- switch to enable/disable the autobalance function
--- pump relay
--- time limit by-pass with autobalance
--- input: day/night switch
--- 4 wires for thermostat connection
--- works with 3 wires thermostat (2 wires for power supply 230 V, 1 output 230 V demand) and 4 wires thermostat for full functionality (day/night signal)
--- connection terminals for thermostat/actuator 0,13 ... 1,5 mm²
--- overload protection
--- protection class: IP20


- Consisting of:
--- Uponor Base controller X-60
--- without power cable
--- mounting material, DIN rail included

- Controller with autobalance function for 230V standard wiring
--- supports up to 10 thermostats (230V)
--- supports up to 12 actuators (230V) which can be fully flexible assigned
--- noiseless actuator switching
--- supports heating and cooling application
--- autobalancing in heating optimises energy use and comfort
--- switch to enable/disable the autobalance function
--- pump and boiler relay
--- time limit by-pass with autobalance
--- inputs: heating/cooling switch, condensation, day/night switch.
--- 4 wires for thermostat connection
--- works with 3 wires thermostat (2 wires for power supply 230 V, 1 output 230 V demand) and 4 wires thermostat for full functionality (day/night signal)
--- connection terminals for thermostat/actuator 0,13 ... 1,5 mm²
--- overload protection
--- protection class: IP20

- Note: for cooling condensation set S-80 is recommended

- Consisting of:
--- Uponor Base controller X-80
--- without power cable
--- mounting material, DIN rail included

- Condensation set suited for condensation control

- Functions:
--- evaluates received dew point information and activates integrated contact when dew point is reached
--- supports up to 5 dew point sensors
--- sensor suited for installation in plastered ceilings/walls or cold-water pipe conduits
--- recommended condensation set for X-80 for cooling applications

- Options:
--- installation on external DIN rail
--- operating voltage: 230V / 50-60 Hz

- Consisting of:
--- 230V converter dew point
--- Sensor dew point