Product Online Catalogue

- for pump groups MPG and CPG

- Controller with autobalance function for 230V standard wiring
--- supports up to 6 thermostats (230V)
--- supports up to 12 actuators (230V), with 2 actuators at a time that follow a common thermostat (6x 2 actuators)
--- noiseless actuator switching
--- autobalancing in heating optimises energy use and comfort
--- switch to enable/disable the autobalance function
--- pump relay
--- time limit by-pass with autobalance
--- input: day/night switch
--- 4 wires for thermostat connection
--- works with 3 wires thermostat (2 wires for power supply 230 V, 1 output 230 V demand) and 4 wires thermostat for full functionality (day/night signal)
--- connection terminals for thermostat/actuator 0,13 ... 1,5 mm²
--- overload protection
--- protection class: IP20


- Consisting of:
--- Uponor Base controller X-60
--- without power cable
--- mounting material, DIN rail included

- Controller with autobalance function for 230V standard wiring
--- supports up to 10 thermostats (230V)
--- supports up to 12 actuators (230V) which can be fully flexible assigned
--- noiseless actuator switching
--- supports heating and cooling application
--- autobalancing in heating optimises energy use and comfort
--- switch to enable/disable the autobalance function
--- pump and boiler relay
--- time limit by-pass with autobalance
--- inputs: heating/cooling switch, condensation, day/night switch.
--- 4 wires for thermostat connection
--- works with 3 wires thermostat (2 wires for power supply 230 V, 1 output 230 V demand) and 4 wires thermostat for full functionality (day/night signal)
--- connection terminals for thermostat/actuator 0,13 ... 1,5 mm²
--- overload protection
--- protection class: IP20

- Note: for cooling condensation set S-80 is recommended

- Consisting of:
--- Uponor Base controller X-80
--- without power cable
--- mounting material, DIN rail included

- Condensation set suited for condensation control

- Functions:
--- evaluates received dew point information and activates integrated contact when dew point is reached
--- supports up to 5 dew point sensors
--- sensor suited for installation in plastered ceilings/walls or cold-water pipe conduits
--- recommended condensation set for X-80 for cooling applications

- Options:
--- installation on external DIN rail
--- operating voltage: 230V / 50-60 Hz

- Consisting of:
--- 230V converter dew point
--- Sensor dew point

- supports up to 6 thermostats (230V)
- supports up to 14 actuators (230V)
- overload protection
- power: 10VA
- protection class: IP40

- Consisting of:
- Uponor Base controller X-23
- mounting material

- supports up to 6 thermostats (230V)
- supports up to 12 actuators (230V)
- rotary channel selector switch for quick actuator assignment
- overload protection
- power: 10VA
- protection class: IP40

- Consisting of:
- Uponor Base flexiboard X-24
- mounting material

- supports up to 6 thermostats (230V)
- supports up to 12 actuators (230V)
- rotary channel selector switch for quick actuator assignment
- pump relay 2A (230V)
- overload protection
- power: 10VA
- protection class: IP40

- Consisting of:
- Uponor Base flexiboard with pump logic X-25 6X
- mounting material

- supports up to 8 thermostats (230V)
- supports up to 12 actuators (230V)
- rotary channel selector switch for quick actuator assignment
- overload protection
- power: 10VA
- protection class: IP40

- Consisting of:
- Uponor Base flexiboard X-26 8X
- mounting material

- supports up to 8 thermostats (230V)
- supports up to 12 actuators (230V)
- rotary channel selector switch for quick actuator assignment
- pump relay 2A (230V)
- overload protection
- power: 10VA
- protection class: IP40

- Consisting of:
- Uponor Base flexiboard with pump logic X-27 8X
- mounting material

- printed scale on dial thermostat
- simple on/off control (bimetall)
- setting range can be limited mechanically by moving pins under the dial
- powered by base unit (Uponor Base controller X-23)
- setpoint range: +5°C … +30°C
- wire: 4x 1.5mm²
- max. cable length: 100m
- protection class: IP30
- color: RAL 9010

- printed scale on dial thermostat for flush installation
- simple on/off control (bimetall)
- setting range can be limited mechanically by moving pins under the dial
- powered by base unit (Uponor Base controller X-23)
- setpoint range: +5°C … +30°C
- wire: 4x 1.5mm²
- max. cable length: 100m
- protection class: IP30
- color: pure white, glossy

- Consisting of:
- Uponor Base thermostat flush T-24 230V
- outer frame 81x85x44.5mm
- cover 50x50mm

- printed scale on dial thermostat
- simple on/off control (bimetall)
- heating/cooling changeover (2-pipe installation)
- setting range can be limited mechanically by moving pins under the dial
- powered by base unit (Uponor Base controller X-23)
- wire: 4x 1.5mm²
- max. cable length: 100m
- protection class: IP30
- color: ~RAL9010

- Consisting of:
- Uponor Base thermostat H/C T-25 230V
- DIP switch for changeover contact heating/cooling