Fill the BIM cart from the product catalogue
Performance you can feel

Uponor Smatrix Wave Flow

Performance you can feel

Comfort that keeps up

Room temperature control systems

Heat pumps are rapidly replacing gas boilers across Europe, but most underfloor heating and cooling controls were not designed with them in mind. The result? Rooms that don’t feel quite right, energy that goes to waste, more effort and higher cost for maintenance.


Energy you can see


At the same time, energy use has never been more visible. Every wasted degree shows up on the bill in winter and in summer, and homeowners rightly expect their heating and cooling to spend energy carefully. The good news: room temperature control has caught up. A new generation of intelligent systems manages all of this quietly in the background, adapting to your home, the season and your heat pump. 

Built on what already works

Every improvement is targeted at the same three things: time on site, system capacity, and how the installation performs with a heat pump.

Smatrix Pulse set the standard for underfloor heating and cooling control. Smatrix Flow raises it.

The first true full-radio underfloor heating and cooling controls system on the market.

A complete room-by-room temperature control system

Smatrix Wave Flow manages the temperature of every room individually, through underfloor heating and cooling. Wireless thermostats sense each room, the controller at the manifold directs heating and cooling exactly where it is needed, and the Smatrix Flow App puts it all in your hand. The system works with any heat source and is ready for heat pumps from day one.


Evolved, not replaced

Smatrix Wave Flow is built on proven Smatrix technology, refined through more than ten thousand systems in homes across Europe. It works with every existing Smatrix thermostat. Everything familiar stays. Everything important got better.

Performance you can feel - All benefits

More thermostats, more capacity - product features


Eight thermostats and ten actuators per controller, up from six and eight. Two more rooms, one fewer component to order, and a set of details that shorten the time at the manifold. Every generation of Smatrix learns from the last. These are the improvements you will notice at home, day after day. An expansion module is available to connect more themostats and actuators. 

Every generation of Smatrix learns from the last. These are the improvements you will notice at home, day after day.

Designed around you

Designed to work as one: Every component, and how it connects.

System overview

Meet the hardware - Everything needed to specify the system

The quiet brain of the system
Installed at the manifold, the room controller drives the actuators and receives from the thermostats registered to it. Autobalancing runs inside it continuously. Two configurable relay outputs handle pump, boiler, chiller, dehumidifier, or heating and cooling changeover.

Features
  • Controls every room individually, and grows with your home
  • Multicolour LED: green for heating, blue for cooling
  • Fallback mode prevents the rooms from cooling down, thereby avoiding frost damage
  • Matt finish with engraved logo
  • An expansion module is available to connect more thermostats and actuators

Key facts
  • 8 thermostat channels, 10 actuator outputs, 2 relay outputs
  • Standalone, or up to 4 controllers with the com munication module
  • DIN rail or screw mounting, any orientation
  • Dedicated antenna per controller, included inside
  • Autobalancing DIP switch for standalone systems
Technical data
Dimensions:  371.5 × 106 × 32 mm -  With expansion module: 511.5 × 106 × 32 mm
Supply: 230 V AC, 50 Hz
Actuator outputs: 24 V AC, Uponor actuators only
Relay outputs: 2, configurable
Radio frequency: 868.3 MHz ±300 kHz
Antenna connection: CAT.5e or CAT.6, RJ45, 3 m supplied, 5 m maximum
 Controller

Intuitive control

Uponor Smatrix Flow App

Set temperatures, create schedules, and check energy trends from anywhere. The new Smatrix Flow App makes daily control effortless, at home or away. Your whole home, one screen Comfort and eco modes, home and away schedules, and a holiday setting for longer trips: the app puts every daily decision in one place, designed to be understood in seconds
Discover intelligent climate control for your home with the new Smatrix Flow App, available for iOS and Android:
 

app store   google play

Apple, the Apple logo, iPhone, iPad, Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. App Store is a service mark of Apple Inc.

Google, Android and other marks are trademarks of Google Inc.

FAQs

More information in our brochures for Smatrix Wave Flow

Related Products and Services