Digital Controls

- Can be combined with Uponor Smatrix Wave/Base (Pro) thermostats
- Can be combined with T-27 thermostat 1120075
- Can be used as floor or remote sensor
- Length: 3m
- Sensor type: NTC 10kOhm at 25℃

- Wallframe for Uponor Smatrix thermostats (not compatible with T-247 and T-267)
- For thermostats T-247 and T-267 use 1144965 - Uponor Smatrix wallframe T-2XY A-2XX- Colour: white RAL9016

- Wallframe for Uponor Smatrix thermostats T-247 and T-267
- Colour: white RAL9016

- Supply water temperature controller
- Control mode: heating only
- Control principle: outdoor temperature compensation

Functions:
- Mixing valve activation
- Weekly program with 9 pre-programmed schedules
- 4 freely programmable schedules
- Pump logic as stand alone
- Pump logic in combination with Uponor Smatrix Base or Wave controller
- Real time information of supply, outdoor and room temperature
- Real time information of mixing valve status
- Real time information of current day shown in a graph (comfort and reduced temperature)

Options:
- DHW production and boiler control
- HW heating circuit
- Up to 100°C supply water control
- 2 powered general purpose outputs
- 2 general purpose inputs
- Security contact thermostat
- 230V mixer motor

Content:
- Uponor Smatrix Move controller H
- Supply/return sensor
- Outdoor sensor
- Protection class: IP30 II
- Colour: dark grey

- Sparepart antenna for Uponor Smatrix Move controller
- Allows wireless connection to Uponor Smatrix Wave thermostats

Content:
- Uponor Smatrix Move antenna
- Connection cable
- Mounting set
- Additional conformity: EAC

- Supply/return sensor
- Measures supply or return temperature
- Sensor type: NTC 10 kΩ at 25 °C
- Length: 3m
- Protection class: IP68 II

- Measures outdoor temperature
- Incl. mounting set
- Can be combined with Uponor Smatrix Wave/Move controllers
- Optional wireless connection, if combined with Uponor Smatrix Wave Thermostat Public
- Protection class: IP55
- Sensor type: NTC 10kOhm at 25°C
- Colour: light grey

- 3-point control
- For Uponor Smatrix Move controller

- Room sensor
- Measures room temperature
- For indoor heating and cooling zones with indoor compensation
- 2-wire connection to Uponor Smatrix Move PRO controller X-159
- Sensor type: NTC10
- Temperature range: 0°C - +60°C
- Protection class: IP20

- Room sensor + RH
- Measures relative humidity for dew point calculations
- For cooling only and heating and cooling zones
- 3-wire connection to Uponor Smatrix Move PRO controller X-159
- Humidity range: 0-100% non-condensing
- Accuracy: < 2% RH
- Operating voltage: 24V / 50-60 Hz
- Operating temperature: -10°C - +50°C
- Protection class: IP20