Fill the BIM cart from the product catalogue

Digital Controls

45 Results found

GF Uponor Smatrix Base PRO interface I-147 Bus

- sparepart touchpanel for Uponor Smatrix Base controller X-147 Bus 6X
- protection class: Class II IP20
- color: white RAL9016

- Consisting of:
- Uponor Smatrix Base PRO interface I-147
- power supply
- mounting material
- wall bracket
- instruction leaflet

GF Uponor Smatrix Base PRO gateway module R-147 KNX

- connects a Uponor Smatrix Base PRO controller X-147 with a BMS or third-party KNX devices
- power supply: 230VAC (+10%/-15%) / 50/60Hz
- internal fuse: T5 F3.15AL 250V, 5x20 3.15A quick acting
- operating temperature: 0°C ... +45°C
- storage temperature: -20°C ... +70°C
- max. consumption: 45W
- power connection: 1m cable with europlug
- connection terminals for system bus: 0.2mm² ... 1.5mm²
- protection class: IP20 II

- Functions:
- room temperatur from Uponor Base or third-party KNX thermostats
- room setpoint from Uponor Base or third-party KNX thermostats
- room relative humidity from Uponor Base or third-party KNX thermostats
- room floor temperatur from Uponor Base or third-party KNX thermostats
- actuator status from Uponor Base or third-party KNX system
- foreced ECO from Uponor Base PRO or third-party KNX system
- pump output from Uponor Base or third-party KNX system
- boiler output from Uponor Base or third-party KNX system
- heating/cooling curve settings/circuit from Uponor Move PRO to BMS or vice versa
- heating/cooling modes from Uponor Base PRO to BMS or vice versa

- Consisting of:
- gateway module R-147 KNX
- power supply
- mounting material (2 screws and 2 wall plugs)
- quick guide

GF Uponor Smatrix Pulse com R-208

- establishes connection between Uponor Smatrix Pulse system, Uponor Smatrix Pulse app and the Uponor cloud

- compatible to:
- Uponor Smatrix Base controller Pulse X-245 Bus 6X
- Uponor Smatrix Wave controller Pulse X-265 6X
- power supply: RJ45 cable to Uponor Wave or Base controller Pulse
- ethernet interface: 10/100 Mbps (RJ45)
- ethernet protocols: Ethernet II
- protection class: Class II IP20
- color: white

- Consisting of:
- Uponor Smatrix Pulse com R-208
- adaptor for DIN rail installations
- RJ45 connection cable (2m)
- first step instructions, safety instructions
- mounting material

GF Uponor Smatrix relay module H/C M-1XX

- interface to a heating/cooling source
- switch over H/C between Uponor Smatrix and H/C source
- incl. socket for DIN rail mounting, manual, mounting material, wall box
- contact: 2 change-over (CO)
- Ucoil: 230VAC
- test voltage: 5kV
- protection class: IP40
- switching voltage: 380VAC, 125VDC
- switching current: 5A@250VAC, 5A@30VDC
- contact material: Ag+Au plated
- temperature range: -40°C...+70°C

GF Uponor Smatrix relay module H/C M-1XX

- interface to a heating/cooling source
- switch over H/C between Uponor Smatrix and H/C source
- incl. socket for DIN rail mounting, manual, mounting material
- contact: 2 change-over (CO)
- Ucoil: 24VDC
- test voltage: 5kV
- protection class: IP40
- switching voltage: 380VAC, 125VDC
- switching current: 5A@250VAC, 5A@30VDC
- contact material: Ag+Au plated
- temperature range: -40°C...+70°C

GF Uponor Smatrix floor/remote sensor S-1XX

- Can be combined with Uponor Smatrix Wave/Base (Pro) thermostats
- Can be combined with T-27 thermostat 1120075
- Can be used as floor or remote sensor
- Length: 3m
- Sensor type: NTC 10kOhm at 25oC

GF Uponor Smatrix wallframe T-X A-1XX

- Wallframe for Uponor Smatrix thermostats (not compatible with T-247 and T-267)
- For thermostats T-247 and T-267 select 1144965 / Uponor Smatrix wallframe T-2XY A-2XX

- Color: white RAL9016

GF Uponor Smatrix wallframe T-2XY A-2XX

- Wallframe for Uponor Smatrix thermostats T-247 and T-267
- Color: white RAL9016

GF Uponor Smatrix Move mixer motor 3 point 230V

- 3-point control
- for Uponor Smatrix Move controller