- sparepart touchpanel for Uponor Smatrix Base controller X-147 Bus 6X- protection class: Class II IP20- color: white RAL9016- Consisting of:- Uponor Smatrix Base PRO interface I-147- power supply- mounting material- wall bracket- instruction leaflet
- connects a Uponor Smatrix Base PRO controller X-147 with a BMS or third-party KNX devices- power supply: 230VAC (+10%/-15%) / 50/60Hz- internal fuse: T5 F3.15AL 250V, 5x20 3.15A quick acting- operating temperature: 0°C ... +45°C- storage temperature: -20°C ... +70°C- max. consumption: 45W- power connection: 1m cable with europlug- connection terminals for system bus: 0.2mm² ... 1.5mm²- protection class: IP20 II- Functions:- room temperatur from Uponor Base or third-party KNX thermostats- room setpoint from Uponor Base or third-party KNX thermostats- room relative humidity from Uponor Base or third-party KNX thermostats- room floor temperatur from Uponor Base or third-party KNX thermostats- actuator status from Uponor Base or third-party KNX system- foreced ECO from Uponor Base PRO or third-party KNX system- pump output from Uponor Base or third-party KNX system- boiler output from Uponor Base or third-party KNX system- heating/cooling curve settings/circuit from Uponor Move PRO to BMS or vice versa- heating/cooling modes from Uponor Base PRO to BMS or vice versa- Consisting of:- gateway module R-147 KNX- power supply- mounting material (2 screws and 2 wall plugs)- quick guide
- establishes connection between Uponor Smatrix Pulse system, Uponor Smatrix Pulse app and the Uponor cloud- compatible to:- Uponor Smatrix Base controller Pulse X-245 Bus 6X - Uponor Smatrix Wave controller Pulse X-265 6X- power supply: RJ45 cable to Uponor Wave or Base controller Pulse- ethernet interface: 10/100 Mbps (RJ45)- ethernet protocols: Ethernet II- protection class: Class II IP20- color: white- Consisting of:- Uponor Smatrix Pulse com R-208- adaptor for DIN rail installations- RJ45 connection cable (2m)- first step instructions, safety instructions- mounting material
- interface to a heating/cooling source- switch over H/C between Uponor Smatrix and H/C source- incl. socket for DIN rail mounting, manual, mounting material, wall box- contact: 2 change-over (CO)- Ucoil: 230VAC- test voltage: 5kV- protection class: IP40- switching voltage: 380VAC, 125VDC- switching current: 5A@250VAC, 5A@30VDC- contact material: Ag+Au plated- temperature range: -40°C...+70°C
- interface to a heating/cooling source- switch over H/C between Uponor Smatrix and H/C source- incl. socket for DIN rail mounting, manual, mounting material- contact: 2 change-over (CO)- Ucoil: 24VDC- test voltage: 5kV- protection class: IP40- switching voltage: 380VAC, 125VDC- switching current: 5A@250VAC, 5A@30VDC- contact material: Ag+Au plated- temperature range: -40°C...+70°C
- Can be combined with Uponor Smatrix Wave/Base (Pro) thermostats- Can be combined with T-27 thermostat 1120075- Can be used as floor or remote sensor- Length: 3m- Sensor type: NTC 10kOhm at 25oC
- Wallframe for Uponor Smatrix thermostats (not compatible with T-247 and T-267)- For thermostats T-247 and T-267 select 1144965 / Uponor Smatrix wallframe T-2XY A-2XX- Color: white RAL9016
- Wallframe for Uponor Smatrix thermostats T-247 and T-267- Color: white RAL9016
- 3-point control- for Uponor Smatrix Move controller
- Wallframe for Sensor RH Style T-141 1087812- Wallframe for Thermostat T-144 1086973- Color: white RAL9016
- Controller with autobalance function for 230V standard wiring--- supports up to 6 thermostats (230V)--- supports up to 12 actuators (230V), with 2 actuators at a time that follow a common thermostat (6x 2 actuators)--- noiseless actuator switching--- autobalancing in heating optimises energy use and comfort--- switch to enable/disable the autobalance function--- pump relay--- time limit by-pass with autobalance--- input: day/night switch--- 4 wires for thermostat connection--- works with 3 wires thermostat (2 wires for power supply 230 V, 1 output 230 V demand) and 4 wires thermostat for full functionality (day/night signal)--- connection terminals for thermostat/actuator 0,13 ... 1,5 mm²--- overload protection--- protection class: IP20- Consisting of:--- Uponor Base controller X-60--- without power cable --- mounting material, DIN rail included
- Controller with autobalance function for 230V standard wiring--- supports up to 10 thermostats (230V)--- supports up to 12 actuators (230V) which can be fully flexible assigned--- noiseless actuator switching--- supports heating and cooling application--- autobalancing in heating optimises energy use and comfort --- switch to enable/disable the autobalance function --- pump and boiler relay--- time limit by-pass with autobalance--- inputs: heating/cooling switch, condensation, day/night switch.--- 4 wires for thermostat connection--- works with 3 wires thermostat (2 wires for power supply 230 V, 1 output 230 V demand) and 4 wires thermostat for full functionality (day/night signal)--- connection terminals for thermostat/actuator 0,13 ... 1,5 mm²--- overload protection--- protection class: IP20- Note: for cooling condensation set S-80 is recommended- Consisting of:--- Uponor Base controller X-80--- without power cable--- mounting material, DIN rail included
