Fill the BIM cart from the product catalogue

Digital Controls & Services

64 Results found

GF Uponor Base controller X-23

- supports up to 6 thermostats (230V)
- supports up to 14 actuators (230V)
- overload protection
- power: 10VA
- protection class: IP40

- Consisting of:
- Uponor Base controller X-23
- mounting material

GF Uponor Base flexiboard X-26

- supports up to 8 thermostats (230V)
- supports up to 12 actuators (230V)
- rotary channel selector switch for quick actuator assignment
- overload protection
- power: 10VA
- protection class: IP40

- Consisting of:
- Uponor Base flexiboard X-26 8X
- mounting material

GF Uponor Base flexiboard with pump logic X-27

- supports up to 8 thermostats (230V)
- supports up to 12 actuators (230V)
- rotary channel selector switch for quick actuator assignment
- pump relay 2A (230V)
- overload protection
- power: 10VA
- protection class: IP40

- Consisting of:
- Uponor Base flexiboard with pump logic X-27 8X
- mounting material

GF Uponor Base condensation set S-80

- Condensation set suited for condensation control

- Functions:
--- evaluates received dew point information and activates integrated contact when dew point is reached
--- supports up to 5 dew point sensors
--- sensor suited for installation in plastered ceilings/walls or cold-water pipe conduits
--- recommended condensation set for X-80 for cooling applications

- Options:
--- installation on external DIN rail
--- operating voltage: 230V / 50-60 Hz

- Consisting of:
--- 230V converter dew point
--- Sensor dew point

GF Uponor Base thermostat T-23 standard

- printed scale on dial thermostat
- simple on/off control (bimetall)
- setting range can be limited mechanically by moving pins under the dial
- powered by base unit (Uponor Base controller X-23)
- setpoint range: +5°C … +30°C
- wire: 4x 1.5mm²
- max. cable length: 100m
- protection class: IP30
- color: RAL 9010

GF Uponor Base thermostat T-24 flush

- printed scale on dial thermostat for flush installation
- simple on/off control (bimetall)
- setting range can be limited mechanically by moving pins under the dial
- powered by base unit (Uponor Base controller X-23)
- setpoint range: +5°C … +30°C
- wire: 4x 1.5mm²
- max. cable length: 100m
- protection class: IP30
- color: pure white, glossy

- Consisting of:
- Uponor Base thermostat flush T-24 230V
- outer frame 81x85x44.5mm
- cover 50x50mm

GF Uponor Base thermostat T-25 H/C

- printed scale on dial thermostat
- simple on/off control (bimetall)
- heating/cooling changeover (2-pipe installation)
- setting range can be limited mechanically by moving pins under the dial
- powered by base unit (Uponor Base controller X-23)
- wire: 4x 1.5mm²
- max. cable length: 100m
- protection class: IP30
- color: ~RAL9010

- Consisting of:
- Uponor Base thermostat H/C T-25 230V
- DIP switch for changeover contact heating/cooling

GF Uponor Base wallframe T-23/25

- for Base Thermostat

GF Uponor Base thermostat dig. prog. T-26

- in-side port for floor/remote sensor connection
- fully programmable - 5/2 or 7 day with four heat levels per day
- multiple regulation control choice - air only, floor only, air and floor
- holiday mode with override feature
- optimised start
- lock facility - tamper proof setting
- status display on current thermostat mode
- powered by base unit (Uponor Base controller X-23)
- optional: remote sensor (sold seperatly 1047459)
- setpoint range: +5°C … +35°C
- protection class: IP20
- color: ~RAL9010

GF Uponor Base sensor remote

- remote sensor for T-26 or thermostat 1047457
- for min/max floor temperature
- length: 3m

GF Uponor Smatrix Move supply cont. X-157 Wired

- supply water temperature controller
- control mode: heating only
- control principle: outdoor temperature compensation

- Functions:
- mixing valve activation
- weekly program with 9 pre-programmed schedules
- 4 freely programmable schedules
- pump logic as stand alone
- pump logic in combination with Uponor Smatrix Base or Wave controller
- real time information of supply, outdoor and room temperature
- real time information of mixing valve status
- real time information of current day shown in a graph (comfort and reduced temperature)

- Options:
- DHW production and boiler control
- HW heating circuit
- up to 100°C supply water control
- 2 powered general purpose outputs
- 2 general purpose inputs
- security contact thermostat
- 230V mixer motor

- Content:
- Uponor Smatrix Move controller H
- supply/return sensor
- outdoor sensor
- protection class: IP30 II
- color: dark grey

GF Uponor Smatrix Move antenna A-155 Radio

- sparepart antenna for Uponor Smatrix Move controller
- allows wireless connection to Uponor Smatrix Wave thermostats

- Content:
- Uponor Smatrix Move antenna
- connection cable
- mounting material
- additional conformity: EAC