Digital Controls & Services

- Condensation set suited for condensation control

- Functions:
--- evaluates received dew point information and activates integrated contact when dew point is reached
--- supports up to 5 dew point sensors
--- sensor suited for installation in plastered ceilings/walls or cold-water pipe conduits
--- recommended condensation set for X-80 for cooling applications

- Options:
--- installation on external DIN rail
--- operating voltage: 230V / 50-60 Hz

- Consisting of:
--- 230V converter dew point
--- Sensor dew point

- printed scale on dial thermostat
- simple on/off control (bimetall)
- setting range can be limited mechanically by moving pins under the dial
- powered by base unit (Uponor Base controller X-23)
- setpoint range: +5°C … +30°C
- wire: 4x 1.5mm²
- max. cable length: 100m
- protection class: IP30
- color: RAL 9010

- printed scale on dial thermostat for flush installation
- simple on/off control (bimetall)
- setting range can be limited mechanically by moving pins under the dial
- powered by base unit (Uponor Base controller X-23)
- setpoint range: +5°C … +30°C
- wire: 4x 1.5mm²
- max. cable length: 100m
- protection class: IP30
- color: pure white, glossy

- Consisting of:
- Uponor Base thermostat flush T-24 230V
- outer frame 81x85x44.5mm
- cover 50x50mm

- printed scale on dial thermostat
- simple on/off control (bimetall)
- heating/cooling changeover (2-pipe installation)
- setting range can be limited mechanically by moving pins under the dial
- powered by base unit (Uponor Base controller X-23)
- wire: 4x 1.5mm²
- max. cable length: 100m
- protection class: IP30
- color: ~RAL9010

- Consisting of:
- Uponor Base thermostat H/C T-25 230V
- DIP switch for changeover contact heating/cooling

- for Base Thermostat

- in-side port for floor/remote sensor connection
- fully programmable - 5/2 or 7 day with four heat levels per day
- multiple regulation control choice - air only, floor only, air and floor
- holiday mode with override feature
- optimised start
- lock facility - tamper proof setting
- status display on current thermostat mode
- powered by base unit (Uponor Base controller X-23)
- optional: remote sensor (sold seperatly 1047459)
- setpoint range: +5°C … +35°C
- protection class: IP20
- color: ~RAL9010

- remote sensor for T-26 or thermostat 1047457
- for min/max floor temperature
- length: 3m