Представництво Uponor в Україні
просп. Миру, б.15, оф.405
м. Київ, Україна
Досвід застосування

Tap water system in Uppsala, Sweden with plastic manifolds and new pipe dimensions, Uppsala, Sweden

Tap water system in Uppsala, Sweden with plastic manifolds and new pipe dimensions

Коротко про проєкт

Uppsala, Sweden
Багатоповерхові будівлі
Система гнучких труб для водопостачання та радіаторного опалення
Рік завершення будівництва: 2013

Вклад Uponor

0
Uponor is supplying systems for tap water and heating in new pipe dimensions and with new manifolds, entirely made of plastic.

Background

New construction is ongoing at Kastanjegatan in Sala backe. Housing association Uppsalahem is having 118 new apartments built. Of these 118 apartments, 28 are for young people, i.e. they are earmarked for people between 18–26 years of age, and 36 are for older people, earmarked for those 55 years and older. The remaining 54 apartments are open to all ages. The first tenants will move in during summer 2012, and the last in spring 2013.

Solution

The tap water system in the new building is from Uponor. The system at Kastanjegatan is unique because for the first time, Uponor combiPEX Q&E RIR is installed in new dimensions, 16 x 2.2 mm. A new manifold made entirely of plastic is also being introduced, the Uponor PPM manifold.

Result

“We have been waiting for this new plastic manifold,” says Thomas Skärfstad, CEO of VVS-Rör AB in Västerås, who are installing the tap water systems at Kastanjegatan. “In a system with plastic pipes, it should be plastic through and through,” Thomas Skärfstad continues. “This means less environmental impact, demolition plans are simpler to carry out and it weighs less than traditional manifolds.” Additionally, a system entirely made of plastic is better value for money.” Mathias Storås of VVS-Rör, who participated in the installation of the Uponor systems at Kastanjegatan, is also pleased with the new product. “The plastic manifold has worked out really well. The new dimensions of the pipes are good, there are many ready-made accessories for 16-pipes.” “The Quick&Easy couplings are really superior to work with,” adds Mathias Storås. “You just can’t go wrong.”

“The water in Uppsala is good, but Uponor’s tap water system with the plastic manifold is especially suitable in areas with aggressive water, since it doesn’t require any metal whatsoever,” says Thomas Skärfstad. The new pipe dimensions offer advantages also at the planning stage. “The primary advantage of the new 16-pipe over the older 15-pipe is the increased inner diameter,” says Per Norling of Ketab VS-Konstruktioner AB. “On the heating side, it is possible to connect several radiators, and on the tap water side, you can go further with only one dimension. For example, at Kastanjegatan the wet rooms were located quite a long way from the stairwell manifolds, but we didn’t need to use 20-pipes. It’s easier both for us, the designers, and for those who carry out the installations,” says Norling.

About Uponor PEX tap water and radiator pipe systems

• Durability-tested in real conditions over 30 years
• Mounting box that simplifies installations and improves safety
• Tolerates high water speeds and all types of water quality
• Approved for foodstuffs in over thirty countries
• Does not rust or get covered with verdigris
• Pipe-in-pipe system (protective pipe and utility pipe) prevents water damage and facilitates upgrades and replacements
• Unique, self-tightening quick release Q&E (Quick & Easy)
• Does not release any taste, smell or heavy metals into the water

Tap water system in Uppsala, Sweden with plastic manifolds and new pipe dimensions

0002889

Інформація про проєкт

Інформація про проєкт

Країна
Sweden
Рік завершення будівництва
2013
Тип проєкту
Референс об'єкти
Тип будівлі
Багатоповерхові будівлі

Партнери

Партнери

Installer
VVS-Rör AB
Västerås
Sweden

Specifier
Ketab VS-Konstruktioner AB
Västerås
Sweden

Подібні проєкти

A housing company Petreliuksenrinne

A housing company Petreliuksenrinne

The Petreliuksenrinne housing company controls a group of residential buildings that were constructed in 1969. The company manages 124 flats, which were subject to an overhaul of their water supply and sewerage systems. The floor drains, bathrooms, electricity distribution and antenna systems were also overhauled.
Apartment building Varsta Oy

Apartment building Varsta Oy

Line renovations in blocks of flats can be conducted significantly faster and more easily. The Uponor R2I cassette makes for a problem-free renovation. Thanks to advanced prefabrication, the project period is shorter and the risks are lower. The As Oy Varsta company in Turku is the first R2I pilot site. The site will be completed to an expedited schedule.
Aleksanterinkatu 5 in Lahti will be completed with R2I blocks

Aleksanterinkatu 5 in Lahti will be completed with R2I blocks

An 8-storey apartment is rising in a former bank district in Lahti. The target will contain 265 apartments and is designed by A1 Arkkitehdit Oy and will be built by Nuorisosäätiö. There are 256 rental apartments reserved for students on floors 2-7. Uponor R2I blocks will be installed in all of the student-apartments in connection with bathroom and kitchen elements. Aleksi 5 is the first new destination in which R2I blocks are being delivered and in which sound-absorbing Decibel drains are used.
Ewha Campus Complex

Ewha Campus Complex

Ewha Womans University had planned the underground campus, which is a global trend for space creation, in order to solve the problem that the available space on the ground was insufficient despite the increase in the space demand in the campus, in accordance with the Ewha Womans University Development Plan in the 21st century.

George Street

George Street

Uponor products set the standard for off-site construction projects by providing a quick to install, cost-effective and high performance plumbing system for the safe delivery of domestic water services for the world’s tallest modular apartment building.
Sluseholmen

Sluseholmen

The Uponor project ’Sluseholmen’ has served as inspiration for developing a brand new and advantageous plumbing solution.
As a result, Uponor now offers a new, optimized and well structured, compact and easy to use prefab basic unit with flexible connectivity options for managing water and heating in varying types of housing.
From now on, Uponor provides the construction market with these prefab shaft units, primarily intended for modern floor building and terraced houses.
 
Brusaporto apartments

Brusaporto apartments

Two apartment buildings in Brusaporto, Italy, offer a high level of living comfort after renovation – also thanks to the Uponor Minitec underfloor heating system. With its low installation height, it is ideally suited for retrofitting.
Refurbishment of a prefabricated building

Refurbishment of a prefabricated building

During the renovation of a prefabricated building in Zwickau, Robinienweg, a low installation height stood in contrast to the desire for more energy efficiency and comfort through underfloor heating. The solution: a slimline combination of Minitec underfloor heating from Uponor and N 440 leveling screed from Knauf.
Applewood Pointe

Applewood Pointe

Developed by Uponor, this new solution takes the guesswork and freelancing out of piping installations. Each kit, which includes all the needed ProPEX® fittings, adapters, valves, and rings, is delivered to the job site — one kit per room or apartment — along with a material list and an isometric layout for the installer to follow, helping to minimize mistakes and maximize efficiency.
Infinity Forest Residence

Infinity Forest Residence

Accessible and surrounded by nature, the site is surrounded by fresh mountain air, generous sun, surrounded by rich forest and park vegetation.
 The key words are the basis of the philosophy for the construction of Infinity Forest Residence: practicality, efficiency, spaciousness, freedom and healthy living.