Uponor
Казус

Feeling comfortable and relaxed in loft apartments, Helsinki, Finland

Feeling comfortable and relaxed in loft apartments

Факти за проекта:

Helsinki, Finland
Многоетажна сграда
Лъчисто отопление и охлаждане
Завършване: 2008

Участие на Uponor

0
Large windows, space and luxurious room heights are features for loft
apartments. But they also means careful planning for heating system. In
year 2008 were introduced a modern building with several loft
apartments. All of the apartments has Uponor underfloor heating system.

In the near centre of Helsinki city were built in 1936 Suomen
Puhallintehdas Oy. The building was used until 1970 after that it has
been empty and without any use. In 2008 Skanska Oy decided to change the
building from manufactory to apartment building with 23 spacious loft
apartments.

Family Oras bought a two story high apartment from the base floor.
The family has now lived in their new home over the winter. Due to
underfloor heating the family hasn’t had to feel cold at any time though
it has been quite low temperature occasionally.

- When we moved in it was necessary to keep the doors wide open
therefore the loft apartment was cold as it can be. We adjusted the
thermostat full heat situation leading after a while too hot, Patrick,
the father, remembers. The right temperature was found rapidly and the
thermostats were left alone. The general temperature is + 21 ° C which
is optimal in environmental way but also for the children playing at the
floor.

Family Oras is happy with their choices in their home. The
underfloor heating has increased the comfort of their home but also
enhanced the noise features. There is no need for pipe lead in walls
etc. The interior decoration did not have to take into account any
radiators allowing wall size windows.

Feeling comfortable and relaxed in loft apartments

0001934

Информация за проекта

Информация за проекта

Адрес
Tapanila
Държава
Finland
Завършване
2008
Тип на проекта
Обновяване
Тип сграда
Многоетажна сграда

Партньори

Партньори

contractor
Skanska Oy
Suomi

Подобни проекти

Skyhouse

Skyhouse

Witness the premium customer experience during this hands-on support as this Austin Texas apartment complex converts...
Uponor participates in construction of Maarjamõisa Medical Campus

Uponor participates in construction of Maarjamõisa Medical Campus

2022 sees the completion of Maarjamõisa Medical Campus managed by Tartu University Hospital. The largest centre of its kind in Estonia, the Campus concentrates active medical care in one compact system. Uponor Estonia is participating as advisor, and as supplier of potable and heating water systems in the second construction phase currently under way.
Underfloor cooling adds value to new construction

Underfloor cooling adds value to new construction

Postitalo, the former post office building in downtown Tampere, got a new look in 2017 when it was renovated into new commercial premises and a block of flats was built on top. The heat distribution system of choice was Uponor's underfloor heating and cooling system, which was installed in all flats.

A line renovation was carried out in a block of flats in Turku using Uponor's R2I elements

Line renovations in blocks of flats can be conducted significantly faster and more easily. The Uponor R2I cassette makes for a problem-free renovation. Thanks to advanced prefabrication, the project period is shorter and the risks are lower. The As Oy Varsta company in Turku is the first R2I pilot site. The site will be completed to an expedited schedule.
Aleksanterinkatu 5 in Lahti will be completed with R2I blocks

Aleksanterinkatu 5 in Lahti will be completed with R2I blocks

An 8-storey apartment is rising in a former bank district in Lahti. The target will contain 265 apartments and is designed by A1 Arkkitehdit Oy and will be built by Nuorisosäätiö. There are 256 rental apartments reserved for students on floors 2-7. Uponor R2I blocks will be installed in all of the student-apartments in connection with bathroom and kitchen elements. Aleksi 5 is the first new destination in which R2I blocks are being delivered and in which sound-absorbing Decibel drains are used.
LEO 250

LEO 250

"LEO 250" brings together sophisticated architecture and superb energy efficiency. Construction time was speed up due to the use of an Uponor systems.
Grand Tower

Grand Tower

More than 400 heat interface units and over 300 km of underfloor heating and cooling pipes for Germany’s highest residential complex.
Ewha Campus Complex

Ewha Campus Complex

Ewha Womans University had planned the underground campus, which is a global trend for space creation, in order to solve the problem that the available space on the ground was insufficient despite the increase in the space demand in the campus, in accordance with the Ewha Womans University Development Plan in the 21st century.

George Street

George Street

Uponor products set the standard for off-site construction projects by providing a quick to install, cost-effective and high performance plumbing system for the safe delivery of domestic water services for the world’s tallest modular apartment building.
Sluseholmen

Sluseholmen

The Uponor project ’Sluseholmen’ has served as inspiration for developing a brand new and advantageous plumbing solution.
As a result, Uponor now offers a new, optimized and well structured, compact and easy to use prefab basic unit with flexible connectivity options for managing water and heating in varying types of housing.
From now on, Uponor provides the construction market with these prefab shaft units, primarily intended for modern floor building and terraced houses.
 
Brusaporto apartments

Brusaporto apartments

Two apartment buildings in Brusaporto, Italy, offer a high level of living comfort after renovation – also thanks to the Uponor Minitec underfloor heating system. With its low installation height, it is ideally suited for retrofitting.
Applewood Pointe

Applewood Pointe

Developed by Uponor Construction Services, new service takes the guesswork — and the freelancing — out of rough-in installs. Each plastic bag of piping fittings is delivered to the job site — one kit per apartment — along with a material list and an isometric layout for the mechanic to follow, minimizing mistakes and maximizing efficiency.