Uponor
Казус

Sluseholmen, Copenhagen, Denmark

Flexible shaft units shorten installation time in house building

Flexible shaft units shorten installation time in house building
The Uponor project ’Sluseholmen’ has served as inspiration for developing a brand new and advantageous plumbing solution.
As a result, Uponor now offers a new, optimized and well structured, compact and easy to use prefab basic unit with flexible connectivity options for managing water and heating in varying types of housing.
From now on, Uponor provides the construction market with these prefab shaft units, primarily intended for modern floor building and terraced houses.
Primary benefits:
  • Much faster, smoother and flawless plumbing installation
  • Flexibility due to possible additional connections to the basic unit
  • Uniform technical quality, design, product flow and service
  • Straight, nice and proper result, kept in one place on little space
  • Including electrical switchboard, mounted on top of the unit
Uponor has developed this new shaft unit in cooperation with KPC, Midtconsult and VVS Søberg, with valuable input from the Uponor factory in Celle, Germany. The new Uponor units are already a required option for an increasing number of planned projects on the construction market.
Uponor sees great potential for the newly developed prefab plumbing solution. Along with our products, we advise about the right choice of solutions, dimensioning etc. for a given project, always carefully considering indoor climate, sustainability, and long-term, proper solutions.
The first stage of project ’Sluseholmen’ is now completed, and Uponor initiate stage 2 and 3, still using the newly developed shaft units.
 

Факти за проекта:

Copenhagen, Denmark
Многоетажна сграда
Завършване: 2018

Участие на Uponor

About 200 shaft units with components for underfloor heating and water heating.
This prefab shaft unit has been newly developed by Uponor, KPC, Midtconsult and VVS Søberg in close cooperation.
The unit consists of a prefab basic unit with additional modules for flexible, individual adaptation.
Stage 2 and 3 in this project are coming up with more than 400 units, in cooperation with the same contractor and HVAC installer.
 
Project ’Sluseholmen’ is a comprehensive floor building project with blocks in Copenhagen’s new and prestigious canal residential area.
Participants:
Builder:                      Danica Pension
Contractor:                KPC
Engineer:                    Midtconsult
Plumbing Installer:   VVS Søberg
Architect:                   Årstiderne Arkitekter
 

Sluseholmen Copenhagen

Flexible shaft units shorten installation time in house building
The Uponor project ’Sluseholmen’ has served as inspiration for developing a brand new and advantageous plumbing solution.
As a result, Uponor now offers a new, optimized and well structured, compact and easy to use prefab basic unit with flexible connectivity options for managing water and heating in varying types of housing.
From now on, Uponor provides the construction market with these prefab shaft units, primarily intended for modern floor building and terraced houses.
Primary benefits:
  • Much faster, smoother and flawless plumbing installation
  • Flexibility due to possible additional connections to the basic unit
  • Uniform technical quality, design, product flow and service
  • Straight, nice and proper result, kept in one place on little space
  • Including electrical switchboard, mounted on top of the unit
Uponor has developed this new shaft unit in cooperation with KPC, Midtconsult and VVS Søberg, with valuable input from the Uponor factory in Celle, Germany. The new Uponor units are already a required option for an increasing number of planned projects on the construction market.
Uponor sees great potential for the newly developed prefab plumbing solution. Along with our products, we advise about the right choice of solutions, dimensioning etc. for a given project, always carefully considering indoor climate, sustainability, and long-term, proper solutions.
The first stage of project ’Sluseholmen’ is now completed, and Uponor initiate stage 2 and 3, still using the newly developed shaft units.
 

Sluseholmen

Sluseholmen1

Информация за проекта

Информация за проекта

Държава
Denmark
Завършване
2018
Тип сграда
Многоетажна сграда

Партньори

Партньори
Participants:
Builder:                    Danica Pension
Contractor:                KPC
Engineer:                  Midtconsult
Plumbing Installer:   VVS Søberg
Architect:                   Årstiderne Arkitekter
 

Подобни проекти

Skyhouse

Skyhouse

Witness the premium customer experience during this hands-on support as this Austin Texas apartment complex converts...
Uponor participates in construction of Maarjamõisa Medical Campus

Uponor participates in construction of Maarjamõisa Medical Campus

2022 sees the completion of Maarjamõisa Medical Campus managed by Tartu University Hospital. The largest centre of its kind in Estonia, the Campus concentrates active medical care in one compact system. Uponor Estonia is participating as advisor, and as supplier of potable and heating water systems in the second construction phase currently under way.
Underfloor cooling adds value to new construction

Underfloor cooling adds value to new construction

Postitalo, the former post office building in downtown Tampere, got a new look in 2017 when it was renovated into new commercial premises and a block of flats was built on top. The heat distribution system of choice was Uponor's underfloor heating and cooling system, which was installed in all flats.

A line renovation was carried out in a block of flats in Turku using Uponor's R2I elements

Line renovations in blocks of flats can be conducted significantly faster and more easily. The Uponor R2I cassette makes for a problem-free renovation. Thanks to advanced prefabrication, the project period is shorter and the risks are lower. The As Oy Varsta company in Turku is the first R2I pilot site. The site will be completed to an expedited schedule.
Aleksanterinkatu 5 in Lahti will be completed with R2I blocks

Aleksanterinkatu 5 in Lahti will be completed with R2I blocks

An 8-storey apartment is rising in a former bank district in Lahti. The target will contain 265 apartments and is designed by A1 Arkkitehdit Oy and will be built by Nuorisosäätiö. There are 256 rental apartments reserved for students on floors 2-7. Uponor R2I blocks will be installed in all of the student-apartments in connection with bathroom and kitchen elements. Aleksi 5 is the first new destination in which R2I blocks are being delivered and in which sound-absorbing Decibel drains are used.
LEO 250

LEO 250

"LEO 250" brings together sophisticated architecture and superb energy efficiency. Construction time was speed up due to the use of an Uponor systems.
Grand Tower

Grand Tower

More than 400 heat interface units and over 300 km of underfloor heating and cooling pipes for Germany’s highest residential complex.
Ewha Campus Complex

Ewha Campus Complex

Ewha Womans University had planned the underground campus, which is a global trend for space creation, in order to solve the problem that the available space on the ground was insufficient despite the increase in the space demand in the campus, in accordance with the Ewha Womans University Development Plan in the 21st century.

George Street

George Street

Uponor products set the standard for off-site construction projects by providing a quick to install, cost-effective and high performance plumbing system for the safe delivery of domestic water services for the world’s tallest modular apartment building.
Brusaporto apartments

Brusaporto apartments

Two apartment buildings in Brusaporto, Italy, offer a high level of living comfort after renovation – also thanks to the Uponor Minitec underfloor heating system. With its low installation height, it is ideally suited for retrofitting.
Applewood Pointe

Applewood Pointe

Developed by Uponor, this new solution takes the guesswork and freelancing out of piping installations. Each kit, which includes all the needed ProPEX® fittings, adapters, valves, and rings, is delivered to the job site — one kit per room or apartment — along with a material list and an isometric layout for the installer to follow, helping to minimize mistakes and maximize efficiency.